Cart 2 india

Specification
Brand : easytooly
BulletPoint1 : Connection: Male
BulletPoint2 : Technics: Forged
BulletPoint3 : Type: TEE
BulletPoint4 : Material: 316 Stainless Steel
BulletPoint5 : Application: inert gas, reactive, flammable, oxidizing and gas mixtures
BulletPoint6 : Packing List: Hexagon Plastic Screw Caps Nut Covers X10
Color : One Color
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 8383889111398
ItemName : 316 Stainless Steel Male NPT Tee, 3 Way Connector 3000psig 20MPa Pipe Fitting Adapter 1PC(3/4 inch)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : compression-fitting-nuts
Manufacturer : easytooly
ModelName : easytooly
ModelNumber : easytooly
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : easytooly
ProductDescription : 316 Stainless Steel Male NPT Tee, 3 Way Connector 3000psig 20MPa Pipe Fitting Adapter 1PC

Connection: Male
Technics: Forged
Type: TEE
Material: 316 Stainless Steel
Application: inert gas, reactive, flammable, oxidizing and gas mixtures

Application
1. For inert gas.
2. For reactive, flammable, oxidizing and corrosive gases and gas mixtures, purity max. 6.0.
3. Pipe fittings also can be used for oils, water, liquids and steam.

Features
1. Excellent finish level to allow smooth flow transition.
2. Every pieces of elbows have radius junction to eliminate entrapment areas and to allow smooth flow transition.
3. Fine threads meets the requirement of ASME/ANSI B1.20.1 to ensure maximum thread engagement.
4. The hardened threads with smooth finishing avoid galling and help to extend the fitting service life.
5. Working pressures are higher than the traditional piping class.
6. Every fitting is marked with thread type, size and material.Material316 Stainless Steel,
Straight fittings are machined from bar stock and shaped fittings from forgings.

Thread Specifications: Pressure Rating for Pipe End Thread
Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.
Installation Instruction
Pipe thread sealant is recommended for a leak tight seal. PTFE tape is commonly used only for installation of the pipe fittings with male thread.
1. Make sure both male and female threads clean.
2. Warp PTFE tape clockwise from the first thread.
3. Two time of wrapping is recommended.
4. Don't overhang tape on the first thread as it might be entered the system.
5. Cut off excess tape.Cautions1. Do not loosen or tighten fittings when system is pressurized.
2. Always use proper thread sealants on tapered pipe threads.
3. Confirm the sealing type when choosing the straight threads, make sure the construction of the matching
ProductSiteLaunchDate : 2025-03-05T14:02:30.437Z
Size : 3/4 inch
UnspscCode : 40141700