Cart 2 india

Specification
Brand : Taytools
BulletPoint : Securely and permanently add metal threads to 3D printed parts
BulletPoint1 : These knife-thread solid brass threaded inserts are designed to be installed in either hard or soft wood, plywood or composites and will receive machine screws or connecting bolts. These inserts are ideal for furniture or fixtures wherever parts need to be assembled and disassembled that could lead to threads stripping. They are ideal for knockdown furniture.
BulletPoint2 : These threaded inserts use an external knife thread that slices into wood providing optimal holding power.
BulletPoint3 : Pilot hole size is 27/64 inch for hardwoods and 13/32 inch for softwoods. Drilling hole size requirements may vary depending on wood species and insertions tools used. It is strongly recommended that test holes be drilled in scrap and inserts tested before drilling finished parts.
BulletPoint4 : Easily installs using a T-wrench, bolt with a jam nut or a dedicated drive insertion tool. To increase pull out strength, install inserts 1/4 inch below the surface. Made from solid brass which protects against corrosion.
BulletPoint5 : Specifications: Thread: 1/4-20, Length: .500 inch, OD: .450 inch, Hole size for hardwoods: 27/64 inch, Hole size for softwoods: 13/32 inch, Material; solid brass
Color : Bronze Tone
DriveSystem : straight slot
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 709874727128
ExternallyAssignedProductIdentifier2 : 0709874727128
ExternallyAssignedProductIdentifier3 : 00709874727128
FinishType : Brass
GpsrSafetyAttestation : 1
GradeRating : industrial
ItemName : Taytools 25 Pieces 1/4-20 Threaded Inserts Solid Brass for Hardwoods, Softwoods, Plywood and Composites Knife Threads (1/4-20, 25)
ItemPackageDimensions_Height : 12.192 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 7.6962 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : Taylor Toolworks
Material : Brass
MeasurementSystem : Inch
MetalType : Brass
MetalType1 : Aluminum
MetalType2 : Carbon Steel
MetalType3 : Alloy Steel
MetalType4 : Iron
MetalType5 : Magnesium
ModelNumber : a16103100ux1032
NumberOfItems : 25
NumberOfPieces : 25
PackageLevel : unit
PartNumber : 106244_X25
ProductDescription : These knife-thread solid brass threaded inserts are designed to be installed in either hard or soft wood, plywood or composites and will receive machine screws or connecting bolts. These inserts are ideal for furniture or fixtures wherever parts need to be assembled and disassembled that could lead to threads stripping. They are ideal for knockdown furniture. These threaded inserts use an external knife thread that slices into wood providing optimal holding power. Pilot hole size is 27/64 inch for hardwoods and 13/32 inch for softwoods. Drilling hole size requirements may vary depending on wood species and insertions tools used. It is strongly recommended that test holes be drilled in scrap and inserts tested before drilling finished parts. Easily installs using a T-wrench, bolt with a jam nut or a dedicated drive insertion tool. To increase pull out strength, install inserts 1/4 inch below the surface. Made from solid brass which protects against corrosion.

Specifications:

Thread: 1/4-20

Length: .500 inch

OD: .450 inch

Hole size for hardwoods: 27/64 inch

Hole size for softwoods: 13/32 inch

Material; solid brass
ProductSiteLaunchDate : 2022-01-22T09:24:48.941Z
Size : 1/4-20
Style : Metric
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 100
UnspscCode : 31161500