Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Specification - Thread Size: M6 x 1mm(Dia*Pitch); Overall Size: 5mm x 8mm / 0.2" x 0.31"(L*OD); Package Content: 25pcs x Knurled Insert Nuts
BulletPoint2 : Material - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
BulletPoint3 : Feature - The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
BulletPoint4 : Advantage - Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension.
BulletPoint5 : Application - Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection, widely used in 3D printing injection molding, computer products, electronic products, circuit board fixing, etc., to achieve tight fixing.
Color : Gold
DriveSystem : Spline
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 847554042649
ExternallyAssignedProductIdentifier2 : 0847554042649
FinishType : Brass
GradeRating : Commercial
ItemName : uxcell Knurled Insert Nuts, 25pcs M6 x 5mm L x 8mm OD 3D Printing Brass Nuts Female Threaded Inserts Brass Heat Set Insert Embedment Nuts
ItemPackageDimensions_Height : 8.9916 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 5.9944 centimeters
ItemPackageQuantity : 25
ItemShape : Hexagonal
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : uxcell
Material : Brass
MaximumShearStrength : 30 MPa
MeasurementSystem : Inch
MetalType : Brass
ModelNumber : JJLM.M10X20-50
NumberOfItems : 25
NumberOfPieces : 25
PackageLevel : unit
PartNumber : a23122300ux0330
ProductDescription : Descriptions:
1. Material - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
2. Feature - The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install.
3. Advantage - Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension.
4. Application - Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection, widely used in 3D printing injection molding, computer products, electronic products, circuit board fixing, etc., to achieve tight fixing.

Specification:
Material: Brass
Finish: Passivation
Thread Size: M6 x 1mm(Dia*Pitch)
Overall Size: 5mm x 8mm / 0.2" x 0.31"(L*OD)
Package Content: 25pcs x Knurled Insert Nuts
ProductSiteLaunchDate : 2024-01-26T11:10:58.692Z
Size : M6 x 5mm x 8mm
Style : 1/4"-20 x 5/8"
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161700