Cart 2 india

Specification
Brand : GRAPH TECH GUITAR LABS
BulletPoint : Model 5072-00 Nut Slotted Flat or Curved Bottom R7.25 L43.18mm (Select Material)
BulletPoint1 : Guitar Amplifier or Effect Pedal Knobs
BulletPoint2 : Dimension: 15.5mm (height) x 12.6mm (Outer diameter); Made of plastic with Set screw ; Fits 1/4" (6.35mm) shaft pots
BulletPoint3 : Please be sure to verify the dimensions before you order the knobs
Color : Green
ExternallyAssignedProductIdentifier1 : 0702725242221
ExternallyAssignedProductIdentifier2 : 702725242221
HandOrientation : right
ItemName : Model 5072-00 Nut Slotted Flat or Curved Bottom R7.25 L43.18mm (Black TUSQ XL)
ItemPackageDimensions_Height : 10.67 centimeters
ItemPackageDimensions_Length : 11.43 centimeters
ItemPackageDimensions_Width : 0.69 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-guitar-nuts
Manufacturer : GRAPH TECH GUITAR LABS
Material : Black TUSQ XL
ModelNumber : PT-5072-00
NumberOfBoxes : 1
PartNumber : PT-5072-00
ProductDescription : If you have a Fender guitar or re-issue from the 1950s-60s or 70s, this is your nut! A 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install. For just about all Fender electric guitars made in the 1950s, '60 and '70s. That's a lot! The 7.25in fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius.
ProductSiteLaunchDate : 2024-08-27T21:43:30.485Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 60131500
WarrantyDescription : Graph tech products have a one year warranty against manufacture defects.