Cart 2 india

Specification
AutoPartOrientation : front
AutoPartPosition : rear
AutoPartPosition1 : front
AutoPartPosition2 : rear
Brand : volport
BulletPoint1 : [Heat Resistant & High Adhesion] The 2.2inch small double sided dash cam adhesive sticker is 40% more sticky than ordinary foam tapes. The high bond sticky attachment enhances the vacuum cup seal, and the sucker holder can still stay firmly in place on bumpy roads. The premium gel material can withstand high temperatures up to 120℃+ (248℉), and can hold to the windshield without melting even in the hot summer in Texas and Florida. The sticky back still performs well in extremely cold winters.
BulletPoint2 : [Adhesive for Dashcam Suction Cup Holder] 4pcs of 56mm red two-sided heat temp proof dash camera 3m VHB stickers provides a strong and reliable bond between the suction cup and the mounting surface. Compatible with Garmin Nav devices suction disc, dash cams, front dashboard camera, driving recorder, GPS navigation and rear-view camera, this durable non-slip heavy duty adhesive refill is designed to allow the dash cam rubber suction disk mount to seamlessly attach to your car's windscreen again.
BulletPoint3 : [Easy Install and Remover] This round red self adhesive replacement tag is easy to use. Just remove the old gule dot on the suction cup surface and wipe it clean, tear off the 3m sticky protective film, align and stick it on the suction base, press evenly and install on the wind shield, stick the auxiliary sticker to increase the stickiness(wait at least 24 hours before peeling it off). When you want to change the dashcam position, you can easily strip it off without leaving any sticky residue.
BulletPoint4 : [Wide Application] The double face removable flat 3M VHB adhesive tape pad kit can be cut and trimmed into smaller sizes or other shapes as needed. These multipurpose waterproof gel strips patches mounting tape pad can secure automotive camera, car recorder, non-circular car camera suction cup, dash cam front, dash cam front and rear, dash cam front and inside, back dash camera screen to smooth surfaces such as glass, plastic, metal, and tiles.
BulletPoint5 : [What you will get] 4*2.2 inch (56mm diameter) heavy-duty anti-heat dash cam circular adhesive part. 8*transparent Auxiliary stickers to promoter adhesion. Reliable stickiness allows drivers of uber, truck, rv, suv, roadster, vehicle and van to drive in a stable and safe environment. You can also use this 2-sided adhesive paper in the office, kitchen wall, bathroom, desk and other places. Note: High viscosity car wind screen suction plate repair sticky tape accessories is for one-time use.
BulletPoint6 : EXTENDED COMPATIBILITY: In some cases (for example, in some of the CX series) you may have two available ports – one exposed port as well as a shrouded mirror covering another port. In this instance we recommend using installing our 10-Pin Type A into the exposed port for a faster and easier installation (although you can choose to install the 10-Pin Type E under the shroud for a more OEM looking result).
BulletPoint7 : AUTO-DIMMING REQUIREMENT: This Dongar dash cam adapter requires an auto-dimming or powered rearview mirror (such as a mirror with garage buttons) to function. Adapter will fit under rearview mirror protective plastic cover
BulletPoint8 : IGNITION-ACTIVATED POWER: This adapter powers your dash cam or other USB-powered device when your vehicle's ignition is ON – it is not intended for parking mode or other constant power applications. By turning on only when your vehicle is on, it eliminates any danger of draining your car’s battery.
BulletPoint9 : COMPLETE KIT: The Dongar Technologies kit includes one (1) dash cam power adapter, along with two (2) shorty USB cables (USB-C and Micro USB) for use with USB-powered devices. Additionally, a plastic pry tool is provided to assist with installation.
Color : grey
CompatibleDevices : Dash cams and dashboard cameras with suction cup mounts
CompatiblePhoneModels : All phone
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : Truck
CompatibleWithVehicleType3 : RV
CompatibleWithVehicleType4 : Minivan
ConnectivityTechnology : USB
ConnectorType : USB Type C
ControlMethod : application
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier : 4713375188285
ExternallyAssignedProductIdentifier1 : 607569681826
ExternallyAssignedProductIdentifier2 : 0607569681826
FieldOfView : 120 degrees
FinishType : Plastic
GpsrSafetyAttestation : 1
Hazmat1 : LITHIUM METAL BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : DE_SmallLithiumMetalBatteryInEquipment
Hazmat11 : EG_SmallLithiumMetalBatteryInEquipment
Hazmat12 : ES_SmallLithiumMetalBatteryInEquipment
Hazmat13 : FR_SmallLithiumMetalBatteryInEquipment
Hazmat14 : GB_SmallLithiumMetalBatteryInEquipment
Hazmat15 : IE_SmallLithiumMetalBatteryInEquipment
Hazmat16 : IN_SmallLithiumMetalBatteryInEquipment
Hazmat17 : IT_SmallLithiumMetalBatteryInEquipment
Hazmat18 : JP_SmallLithiumMetalBatteryInEquipment
Hazmat19 : MX_SmallLithiumMetalBatteryInEquipment
Hazmat2 : UN3091
Hazmat20 : NL_SmallLithiumMetalBatteryInEquipment
Hazmat21 : PL_SmallLithiumMetalBatteryInEquipment
Hazmat22 : SA_SmallLithiumMetalBatteryInEquipment
Hazmat23 : SE_SmallLithiumMetalBatteryInEquipment
Hazmat24 : SG_SmallLithiumMetalBatteryInEquipment
Hazmat25 : TR_SmallLithiumMetalBatteryInEquipment
Hazmat26 : US_SmallLithiumMetalBatteryInEquipment
Hazmat27 : ZA_SmallLithiumMetalBatteryInEquipment
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumMetalBatteryInEquipment
Hazmat5 : AU_SmallLithiumMetalBatteryInEquipment
Hazmat6 : BE_SmallLithiumMetalBatteryInEquipment
Hazmat7 : BR_SmallLithiumMetalBatteryInEquipment
Hazmat8 : CA_SmallLithiumMetalBatteryInEquipment
Hazmat9 : CN_SmallLithiumMetalBatteryInEquipment
IncludedComponents : Hardwire Kit
IncludedComponents1 : 4*Double-sided high temperature resistant adhesive pad
IncludedComponents2 : 8*Clear auxiliary stickers
IncludedComponents3 : 1*User Manual
IncludedComponents4 : 1*Easy Pry Tool
IncludedComponents5 : 1*User Manual+1*Installation Guide
IncludedMemoryCardSize : 64 GB
InputVoltage : 12 volts
ItemName : volport Sticky Adhesive Pad Replacement for Dash Cam Suction Cup Mount, 4pcs 2.2" 3M VHB Round Heat Resistant Double Sided Mounting Sticker Tape for Dashcam Car Dashboard Windshield Camera GPS Holder
ItemPackageDimensions_Height : 10.3 centimeters
ItemPackageDimensions_Length : 1.2 centimeters
ItemPackageDimensions_Width : 6.5 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : vehicle-on-dash-video
Manufacturer : volport
Material : foamed adhesive
MaxAperture : 1.6 f_stop
ModelName : volport
ModelNumber : V127
MountingType : Windshield & Windscreen & Vehicle Front glass
NominalPower : 10 watts
NumberOfItems : 4
NumberOfLithiumMetalCells : 1
NumberOfPorts : 1
PartNumber : REDTIGER-OBD-KIT
PowerPlugType : type_e_2pin_fr
ProductDescription :

Why choose volport strength adhesive?

Are you worried about the adhesive melting in the hot summer? Are you troubled by the suction disc mount falling off on bumpy roads? This genuine 3M VHB adhesive pad will solve all your problems.

1. Extremely strong adhesive: The size of 4 pieces of 2.2inch (56mm) round replacement 2 face window adhesive stickers perfectly fits the suction cup holder of the driving recorder without any cutting. No need to buy a new suction disk or even a new dash cam or dashboard camera stand, you can simply replace the sticker to restore original functionality and stability.

2. High temperature resistance: Multi-pack High-quality foam adhesive material, which has passed strict extreme high temperature 120℃ (248℉) and cold low temperature tests, can firmly fix the suction cup support under any weather conditions. With this high temperature resistance self adhesive sheet, you can drive with confidence knowing your dash cam will work securely and reliably.

3. No residue: This removable high-bond gel pad leaves no residue and can be easily peeled off when you want to change the position of your driving recorder.

1. Wipe the dash cam suction cup and windshield surface

2. Peel off the yellow film and Stick the adhesive on the dashcamera suction cup

3. Press evenly to make the adhesive and suction cup fit completely

4. Peel off the red film and stick it on the windshield

5. Fix the suction cup bracket

6. Apply the auxiliary sticker (wait at least 24 hours before removing)

Installation Tips:

1. Loosen the dash cam suction cup bracket clip lock before installation.

2. Before pasting, you need to completely peel off the remaining old gel spots. A dental floss tool can be used to help remove the old glue.

3. Slide and press evenly to expel the air between the sticker and the suction cup

4. Be careful not to touch the adhesive with your hands when tearing off the adhesive protective film.

5. When removing the red protective film, pay attention to pressing the base pad tightly. If the adhesive base pad is lifted with the protective film, you can press it strongly and then tear off the protective film.

6. After installing it on the wind shield, you can slightly pull the suction cup to form a vacuum seal.

7. Please do not use the thick 3m sticker on soft leather, oily, uneven, textured, wet, silicone, rough and other surfaces. Please use it on dry and smooth surfaces such as glass, metal, tiles, etc.

The diameter of the sun resistant 2sided acrylic vinyl tape is only 56mm, but it can be trimmed and cut into smaller sizes to meet the needs of installing other accessories in daily life, such as: semi truck dash cam, socket grips, finger ring holders, ring action camera, magic ball auto mount, interior accessories, car duck, bobblehead, cat paw board, decoration, coffee coaster, picture frame, decoration, hook, for iPad/tablet holder, bobblehead, towel rack/rod, Shower towel hook, paper towel rod, cellphone stand, for go pro, small sensor light, and mobile phone base.

ProductSiteLaunchDate : 2024-07-08T07:00:00.000Z
Size : V200
SpecificUsesForProduct : Car Audio & Video
Style : OBD Hardwire Kit of REDTIGER
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedStandards : MOV, MP4
UnitCount : 4
UnspscCode : 31201500
VideoCaptureResolution : 2160p
WarrantyDescription : 1 Year
WaterResistanceLevel : water_resistant