Cart 2 india

Specification
Brand : TEKTON
BulletPoint1 : Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping
BulletPoint2 : Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading
BulletPoint3 : 15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles
BulletPoint4 : Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating
BulletPoint5 : Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool
BulletPoint6 : Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan
Color : Silver
ExternallyAssignedProductIdentifier : 6936279526498
ExternallyAssignedProductIdentifier1 : 020209989869
ExternallyAssignedProductIdentifier2 : 0020209989869
ExternallyAssignedProductIdentifier3 : 00660731649116
FinishType : Electroless Nickel
GpsrSafetyAttestation : 1
IncludedComponents : (1) TEKTON 3/8 Inch Drive x 15/16 in. 6-Point Flare Nut Crowfoot Wrench | WCF15224
ItemDisplayWeight : 0.1 pounds
ItemLength : 1.18 inches
ItemName : TEKTON 3/8 Inch Drive x 15/16 Inch 6-Point Flare Nut Crowfoot Wrench | WCF15224 | Made in USA
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : open-end-wrenches
Manufacturer : TEKTON
Material : Alloy Steel
Material1 : Alloy Steel
Material2 : Iron
MeasurementSystem : inch
MeasurementSystem1 : metric
MeasurementSystem2 : inch
ModelName : 3/8 Inch Drive x 15/16 in. 6-Point Flare Nut Crowfoot Wrench | WCF15224
ModelNumber : WCF15224
NumberOfItems : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : WCF15224
ProductDescription : Crafted from carbon steel and fortified by heat treatment, these wrenches have maximize durability, resisting wear, corrosion, and deformation. The nickel plating prevents rust and ensures smooth operation every time.
The standard open end wrench with added thickness ensures a firmer grip on nuts and bolts for better torque transmission and reduced slippage, making your tasks easier, faster, and safer. Clearly stamped size indicators ensure swift selection and effortless identification. The extra hole on the opposite end designed to accommodate an extension bar, allowing for increased leverage and for convenient storage options.
Widely applicable in automotive repairs, plumbing, furniture assembly & repair, machinery maintenance,construction and DIY projects.
Single open end spanners are useful tools primarily used for tightening or loosening nuts and bolts with flat sides, especially in situations where a socket wrench or adjustable wrench cannot reach due to space constraints.
Always use the correctly sized wrench to avoid rounding off bolt heads or damaging the wrench.

ProductSiteLaunchDate : 2023-07-19T08:00:01.000Z
Size : 15/16 in.
Style : Inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700