Cart 2 india

Specification
Brand : Williams
BulletPoint1 : Wrench heads are offset at 15° and 60° to the handle
BulletPoint2 : Both ends are the same size to permit the wrench to be used in four different positions
BulletPoint3 : 45° Chamfer on wrench ends allow easy placement of wrench on the fastener
BulletPoint4 : Continuous arc design minimizes spreading and is stronger than ”v” design
BulletPoint5 : Thin head is perfect for tight clearances
Color : Silver
CompatibleFastenerDescription : 0.5 inch
CustomerPackageType : Standard Packaging
DriveSystem : Hex
ExternallyAssignedProductIdentifier1 : 662459331724
ExternallyAssignedProductIdentifier2 : 0662459331724
ExternallyAssignedProductIdentifier3 : 00662459331724
FinishType : Powder Coated
IncludedComponents : no
ItemLength : 5.59 inches
ItemName : Williams JHW3718-TH Double Open End Angle Wrench
ItemPackageDimensions_Height : 2.286 centimeters
ItemPackageDimensions_Length : 14.478 centimeters
ItemPackageDimensions_Width : 3.302 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : open-end-wrenches
Manufacturer : Williams
Material : Chrome Vanadium Steel
MeasurementSystem : metric
MeasurementSystem1 : metric
MeasurementSystem2 : inch
ModelName : Williams Tools at Height Double Open End Angle Wrench
ModelNumber : JHW3718-TH
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : JHW3718-TH
ProductDescription : 1. Constructed from forged and quenched chrome vanadium steel with a corrosion-resistant sandblasted finish, high hardness and durable to use.
2. Long arm adopts ball profile design, you can easily tighten and loosen the socket cap screws at a 25-degree entry angle, which helps to get into hard-to-touch places.
3. The ball end is chamfered to slide easily into the fastener, reducing wear on the wrench and fastener head.
4. Long arm/short arm design to apply maximum torque in required applications.
5. Widely used to remove and install most socket cap screws found in furniture, equipment, and most general application.

Specification:
Standard: SAE
Size: 5/32-inch
Long Arm Length: 142mm / 5.59-inch
Short Arm Length: 28mm / 1.1-inch
Material: Chrome Vanadium Steel (CR-V)
Finish: Chrome Plating
HRC: 42-50

Package Content:
4 Pcs x Ball End Hex Key Wrench
ProductSiteLaunchDate : 2014-03-26T00:00:01-07:00
Size : 9/16 Inch
Style : Durable
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700