Cart 2 india

Specification
Brand : IndustrialField
BulletPoint1 : VL6180 VL6180X Range Finder Optical Ranging Sensor Module for Arduino I2C Interface Board IR Emitter Ambient Light High Accuracy
BulletPoint2 : Developed Countries Estimated Delivery Time: 7-17 days(trackable),Other countries Estimated delivery time : 8-30 days.----- We provide Expedited Shipping service : 3-8 days.(excluding handling time).If the order amount above US $200, we will use Expedited Shipping service for free.
BulletPoint3 : If it is not delivered within the specified time, or if it is not satisfactory. You only need to send a refund request and we will refund you in full.
BulletPoint4 : We make every effort to provide customers with satisfactory service.any question,please feel free to contact me.
BulletPoint5 : any question,please feel free to contact me.
ExternallyAssignedProductIdentifier : 4793392487448
ItemName : VL6180 VL6180X Range Finder Optical Ranging Sensor Module for Arduino I2C Interface Board IR Emitter Ambient Light High Accuracy
ItemTypeKeyword : electronic-component-optical-sensors
Manufacturer : IndustrialField
Material : iron
PartNumber : IF-modulen_11563
ProductDescription :
Product introduction:
The VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor. The VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance.
Unlike most distance sensors that rely on reflected light intensity or angle of reflection to determine the distance, the VL6180 uses an accurate clock to measure the time it takes for light to bounce off the surface, since it uses a very narrow source, which is different from ultrasonic sonar. Unlike traditional infrared distance sensors, you can't tell if an object is close because there is no linear problem or "dual imaging." Therefore, the VL6180X is more accurate.
The VL6180 module is recommended to handle distances from 5mm to 100mm. Due to its small size, the sensor module is easy to use in any robot or interactive project. You can use it with any 3-5V power supply or logic microcontroller.

Product Features
1. Integrated intelligent optical module, which can be used for proximity sensing, ranging and other functions;
2. Fast and accurate distance measurement. Measure the absolute range from 0 to 100 mm or more. Based on object-independent self-illuminating beam reflection measurements, measurements over 100 mm can be used in some extremely desirable target reflectances and environments, but are not guaranteed;
3. I2C interface for device control and data, two programmable GPIOs.

PIN-OUT
Power Pins:

Vin - this is the power pin. Since the chip uses 2.8 VDC, we have included a voltage regulator on board that will take 3-5VDC and safely convert it down. To power the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like Arduino, use 5V
2v8 - this is the 2.8V output from the voltage regulator, you can grab up to 100mA from this if you like
GND - common ground for power a
ProductSiteLaunchDate : 2019-10-14T19:05:50.686Z