Cart 2 india

Specification
Brand : Hammers
BulletPoint1 : Easy to install. No drilling needed
BulletPoint2 : Top rail is compatible with weaver style scope rings and has 13 ring slots for choices of scope placement
BulletPoint3 : Anodized stainless silver finish
BulletPoint4 : This base is a little taller than the popular set-screw models
BulletPoint5 : Recommended torque spec: 22 in/lb (2.5 NM)
BulletPoint6 : SECURELY FASTENED - hold securely even with high recoil, resist shaking and falling off and fit perfectly with standard 20mm Picatinny rails or MIL-STD-1913 rails
Color : Silver
CompatibleWithVehicleType1 : Automobile
CompatibleWithVehicleType2 : Truck
CompatibleWithVehicleType3 : Boat
Department : ""
ExternallyAssignedProductIdentifier1 : 0816307021286
ExternallyAssignedProductIdentifier2 : 816307021286
ExternallyAssignedProductIdentifier3 : 00841370116874
GpsrSafetyAttestation : 1
ImportDesignation : Made in the USA
IncludedComponents : All rails come with hardware
ItemName : Hammers Stainless Silver Red Dot Scope Base Rail Mount for Dan Wesson Vent Rib Barrel Revolver
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 9.5 inches
ItemPackageDimensions_Width : 3.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : sporting-optic-mounts
Manufacturer : Hammers
Material : Aluminum
ModelName : Anschutz Model 1761 Improved Scope Rail
ModelNumber : 49536
MountingType : Weaver Mount
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 171346
Pattern : Solid
ProductDescription : Scope Base Mount for Dan Wesson Vent Rib Barrel Revolver

A scope base rail in stainless silver finish for Dan Wesson revolver. The rail has 13 ring slots which make it easier to set up eye relief and find more desired placement of scopes or red dot sights on top of the revolver. No drilling is needed. The scope rail is clamped onto the vent rib using the hex screws and two side plates. There are also two supporting hex screws on both top ends of the rail with locking screws that can be used to rest against the top of vent rib to give additional support. Just let the tip of the supporting hex screw to touch the top surface of vent rib and do NOT overtighten the screw which can mar the finish on the vent rib. Unlock the locking screws first to apply these supporting hex screws and remember to tighten up the locking screws afterward.
Top rail is compatible with weaver style rings and also will mount red dot sights with weaver style mount. Machined from extruded aluminum alloy. Mounting screws and L hex wrenches are included with the unit.
Rail type: weaver
Number of ring slots: 13
Overall length: 5 1/4”
Finish: Anodized matte stainless silver
Weight: 3.4oz

* Always a good idea to factor in the recoil expected and consider the weight of the scope or red dot sight and choose what to use with the rail. When mounting the rail onto the revolver, Check alignment of the rail with the center line of barrel before tightening the clamping screws. Using blue thread locker glue is recommended and check on the screws periodically as they might become loose due to recoil. Always be sure to unload and practice safe gun handling when mounting the rail.
ProductSiteLaunchDate : 2020-09-25T19:42:01.160Z
Size : WS02027
SportType : Hunting
Style : Anschutz 1761 Scope Base- 30MOA
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 49000000
WarrantyDescription : 30 days
WaterResistanceLevel : not_water_resistant