Cart 2 india

Specification
Brand : Zerodis
BulletPoint1 : The module adopts relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
BulletPoint2 : Using optocoupler isolation, it has strong driving ability and stable performance; current is 5mA.
BulletPoint3 : Fault-tolerant design, even if the control line is broken, the relay will not move.
BulletPoint4 : Modules can be triggered by setting high or low levels through wire jumper.
BulletPoint5 : The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient.
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 5601095243102
ItemName : 2 Channel Relay Module with 2 Channel Relay Module, High and Low Level Transistorised Relay 12 Volt, Mach 3 Board Relays Optocoupler Isolation High and Low
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : optocouplers
Manufacturer : Zerodis
Material : Copper
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Metric
ModelName : Zerodis9t27byfsih-02
ModelNumber : Zerodis9t27byfsih-02
NumberOfItems : 1
OperationMode : Automatic
PartNumber : Zerodis9t27byfsih-02
ProductDescription : 1. The module adopts relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
2. Using optocoupler isolation, it has strong driving ability and stable performance; current is 5mA.
3. Modules can be triggered by setting high or low levels through wire jumper.
4. Fault-tolerant design, even if the control line is broken, the relay will not move.
5. The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient.

Spec:
Feature:
The module adopts relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
Using optocoupler isolation, it has strong driving ability and stable performance; current is 5mA;
Modules can be triggered by setting high or low levels through wire jumper.
Fault-tolerant design, even if the control line is broken, the relay will not move.
The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient.
Equipped with 4 fixed screw holes, easy to install.
Specification:
Working voltage: 5V, 12V, 24V(Optional)
load: AC 250V/10A; DC 30V/10A
Channel: 2
Product dimension: 50*41*18.5mm / 2*1.6*0.7in
Power light: Green
Relay light: Red
Board color: Red
Package list:
1 * Relay Module
Note:
Module interface:
1. DC+: Connect the positive pole of the power supply
2. DC-: Connect power supply negative pole
3. IN1:1 terminal, can set high or low level control relay suction
4. IN2:2 terminal, can set high or low level control relay suction
Relay output:
1. NO1: 1 channel relay usually opens the interface. The relay is suspended before suction and short-connected with COM1 after suction.
2. COM1: 1 channel relay common Interface
3. NC1: 1 channel relay normally closed interface, short connection with COM1 before relay suction, suspension after suction
4. NO2: 2
ProductSiteLaunchDate : 2024-03-30T02:11:20.220Z
Size : 12V
Style : 12V
UnspscCode : 39122300
Voltage : 10 volts