Cart 2 india

Specification
Brand : Beufee
BulletPoint1 : PRACTICAL: Optocoupler can realize 3.3V or 5V to control the interface of 3.6 to 24V voltage. After the control terminal is turned on, the controlled terminal will also be turned on.
BulletPoint2 : MULTIPURPOSE: Optocoupler board, photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
BulletPoint3 : APPLICABLE SCOPE: Optocoupler isolation board, If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
BulletPoint4 : MULTI FUNCTIONAL: Optocoupler module through the jumper cap can achieve whether the output is high potential output or low output. The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
BulletPoint5 : APPLICABLE TO: This optocoupler isolation module is used when the actual operation requires isolation control and voltage conversion. You can use it with confidence.
ItemName : Beufee Optocoupler, 4 Channel Optocoupler Isolation Board Optocoupler Isolation Module Optocoupler PC 817 Optoisolator Module
ItemPackageQuantity : 1
ItemTypeKeyword : optocouplers
Manufacturer : Beufee
Material : Copper
PartNumber : Beufeeo7nisxw8hp
ProductDescription : PRACTICAL: Optocoupler  can realize 3.3V or 5V to control the interface of 3.6 to 24V voltage. After the control terminal is turned on, the controlled terminal will also be turned on.
MULTIPURPOSE: Optocoupler board, photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
APPLICABLE SCOPE: Optocoupler isolation board, If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
MULTI FUNCTIONAL: Optocoupler module through the jumper cap can achieve whether the output is high potential output or low output. The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.



Specification:
Condition: Brand New
Item Type: 4-way Voltage Isolation Board
Material: ABS
Guide gate signal voltage: 3.6-24V
Output Port Voltage Port: 3.6-30V
The jumper can  the exit gate: high potential or pull the exit pad

Package list:
1 x 4-way Voltage Isolation Board

Notes:
1. The actual product color may deviate from the photo due to light.
2. There may be a slight deviation in the measurement of product.

ProductSiteLaunchDate : 2024-05-08T13:11:31.278Z
UnspscCode : 53000000