Cart 2 india

Specification
Brand : GOOZEEZOO
BulletPoint1 : 2024 New Upgrade: This GPSDO, compared to a regular timebase, can quickly locate problems. It has higher accuracy, lower temperature drift, and more stable output
BulletPoint2 : Accurate & Fast: It uses the GPS 1PPS signal, compares it with the microcontroller, and outputs a 16-bit PWM signal to control the output accuracy of the temperature-compensated crystal. The voltage for fine-tuning the frequency of the temperature-compensated crystal is 0-5V. Therefore, 1 bit of PWM can control the output voltage to be 0.000076V
BulletPoint3 : High-precision: Output frequency: 10.000000.000MHz ±0.001Hz; Supply voltage: DC12V ±2V; Working current: 350mA; 650mA(preheating); Output waveform: square wave; Output amplitude: -45dBm; Thermostatic crystal: ISOTEMP OCXO 143-141(disassembly); GPS module: NEO-6M
BulletPoint4 : How to Calibrate: When powered on,the screen displays "10.00MHz GPSDO". If there is no GPS antenna installed, this content will continue to be displayed. Once the GPS antenna is installed and satellite locked, the screen will display the correction value of PPb after comparing with the 1PPS signal and the current PWM adjustment value. It takes about 30 minutes for the initial calibration
BulletPoint5 : When the PPb value is observed within 0.0±1, press the encoding switch to enter the menu. Rotate the encoder to find the "PWMSET" option and press the encoder switch to save the current PWM value. Rotate encoder again and find "EXIT!! OK "and press the encoder switch to exit the menu. At this point, the calibration is basically completed. After calibrating and saving the PWM value, it is not necessary to install the GPS antenna for subsequent use
BulletPoint6 : Portable & Widely used: The GPSDO is a highly portable device that can be taken anywhere for various needs, thanks to its compact dimensions of 5.9 * 3.5 * 1.5 inch. GPSDO is suitable for high-end audio decoders, frequency meters, signal generators and other devices with external 10MHz reference source input
CompatibleDevices : Personal Computer, Tablet, Smartphone
ConnectivityTechnology : GPS
IncludedComponents : GPSDO, GPS Antenna
ItemName : GOOZEEZOO 2024 Upgraded GPSDO NEO-6M Global Positioning System Disciplined Oscillator Accurate & Fast: ±0.001Hz/Square Wave (Without Power Supply)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 9.3 inches
ItemPackageDimensions_Width : 6.3 inches
ItemTypeKeyword : oscillators
Manufacturer : GOOZEEZOO
Material : Aluminum Alloy
ModelNumber : NEO-6M
NumberOfItems : 1
ProductDescription : Specifications：
Item Type: GPS Disciplined Oscillator
Material: Aluminum Alloy
Power Supply Voltage: DC12V ±2V
Working Current: 650mA During Preheating, 350mA When Stabilized
Output Frequency: 10.0000000.000MHz ±0.001Hz
Output Waveform: Square
Output Amplitude: -45dBm
Thermostatic Crystal: ISOTEMP OCXO 143-141 (Disassembled)
GPS Module: NEO 6M
How to Use:
When turned on, the screen displays 10.00MHz GPSDO, and if a GPS antenna is not installed, this content will continue to be displayed. After installing the GPS antenna and locking the satellite, the screen will display the PPb correction value and the current PWM adjustment value after comparing the 1PPS signal.
When used for the first time, it takes about 30 minutes to proofread and correct. When the PPb value is observed to be 0.0±1, press the encoding switch to enter the menu, rotate the encoder to find the PWMSET option, and press the encoder switch to save the current PWM value.
Rotate the encoder again, find EXIT!! OK and press the encoder switch to exit the menu. At this point, the calibration is basically completed.
After calibrating and saving the PWM values, the GPS antenna can be omitted for next use.
Package List:
1 x GPS Disciplined Oscillator
1 x Antenna

ProductSiteLaunchDate : 2023-11-02T10:01:07.934Z
SpecificUsesForProduct : High-end audio decoders, frequency meters, signal generators
SupportedApplication : Alarm
UnspscCode : 52161500
WarrantyDescription : 1 year manufacturer