Cart 2 india

Specification
Brand : JZGDX
BulletPoint : Oscilloscope Probes
BulletPoint1 : Oscilloscope Probes
BulletPoint2 : Origin: Zhejiang
BulletPoint3 : Whether to import: No
BulletPoint4 : Custom processing: Yes
Color : One Color
ExternallyAssignedProductIdentifier : 9495569319518
ItemName : JZGDX 2PCS DC Digital Dual Display Voltage and Current Meter Digital Display Head 12V 10A 0-100V Voltage and Current Detection
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-accessories
Manufacturer : JZGDX
MeasurementAccuracy : 1
ModelName : JZGDX
ModelNumber : JZGDX
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZGDX
PowerSourceType : Ac
ProductDescription : Oscilloscope ProbesMeasuring range: DC0-100VInput voltage: DC3.5-30VAmbient temperature: 25Weight: 20Overall dimensions: 48mm*29mm*21mmVoltage measurement error: (1%+2 words)Specifications: YY0-100V single redUnit weight: 0.02kgFeatures:Note: This current model can only measure the negative one-way current, and cannot measure charging and discharging at the same time.The parameters are as follows:Opening size: 45mm*26mm (open the opening to directly snap the watch into the panel)Overall dimensions: 48mm*29mm*21mmSupply voltage:DC3.5-30V (thin red wire positive and thin black wire negative)Remember not to overvoltage the power supply lineWeight: 20g/pieceDisplay mode: dual 3-digit 0.28-inch LED digital tubeDisplay color: redRefresh speed: about 500ms/timeMeasurement accuracy: (1%+2 words)Voltmeter range: DC 0-100V (resolution 0.1V)Ammeter range: DC 0-9.99A (resolution 0.01A)Note: When the measured current exceeds 6A for a long time, please solder the lead directly to the socket to avoid unstable line operation due to excessive contact impedance.Onboard wire function description:Thin red line (VCC):Positive power supply input (3.5-30V)Note: If the measurement signal is lower than 30V and the power supply is sufficient, it can be directly used as the power supply of the module (use the thin yellow wire and the thin red wire in parallel)Thin black wire (GND): The negative pole of the power supply input (3.5-30V) and the measurement signal share the same groundThin Yellow Line (VIN):Measurement signal input positive pole (0-100V)Thick red line (I+):Current input positive pole (must be connected to the negative pole of the load)Thick black line (I-):Current input negative pole (must be connected in series with the negative pole of the power supply)Wiring usage reminder: The meter can only meas
ProductSiteLaunchDate : 2024-03-09T03:43:56.988Z
Size : YY0-100V red
UnitCount : 1
UnspscCode : 41113600