Cart 2 india

Specification
Brand : JZGDX
BulletPoint : Oscilloscope Probes
BulletPoint1 : Oscilloscope Probes
BulletPoint2 : Red wire +: The positive pole of the power supply needs to be connected to the positive pole of the power supply within the DC range of 3.5-30V.
BulletPoint3 : Black wire-: negative pole of power supply, and VIN- straight through
BulletPoint4 : Red line VIN+: positive pole of measurement signal (0-4.3000V-33.000V automatically adapts)
BulletPoint5 : Black line VIN-: negative pole of measurement signal
BulletPoint6 : Note: The meter needs to be powered independently, and the power supply range is DC 3.5-30V.
Color : CT 150A
ExternallyAssignedProductIdentifier : 9495569321238
ItemName : JZGDX SDM-A Digital Ammeter, Slim Compact, LED Panel Meter (Color : CT 150A, Size : 36X96MM_220-240V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-accessories
Manufacturer : JZGDX
MeasurementAccuracy : 1
ModelName : JZGDX
ModelNumber : JZGDX
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZGDX
PowerSourceType : Ac
ProductDescription : Oscilloscope ProbesGeneralDesigned to monitorize current of electrical charge of any system.Usage and Working PrincipleMake the connections according to the diagram. Make the connections of current transformers used for ampermeter before the electrical chargewhich required to measure in the system.Current transformers don't sense the current of electrical charge which connected before them. Put max 5A charge for SDM-A36, SDM-A48, SDM-A72 and SDM-A96 types. Otherwise, device might be damaged or might give error. Push "menu" button when the power is on. Set the current transformer ratio by "up"-"down" buttons and re-push "menu" to record your setting. You can see the current of system.Current transformers which used for direct ampermeters are in the same box with device and current ratio is already fixed, in this case, there is no menu for record.MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical might damage the device. Make sure device works after cleaning.WarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un)....: 150V - 270V ACOperating Frequency.......: 50/60 Hz.<;4VAOperating Temperature..: -20C.....+55CMeasurement Range.......: 100mA - 5.5AMeasurement Precision..: %1Display..................................: 20mm(96),14mm(72)9mm(36 and 48)displayConnection Type..............: Plug-in terminalCable Diameter.................: 1,5mm²Weight................................: Max. 220gr.Panel Hole Sizes................: 91x91mm(96) 68
ProductSiteLaunchDate : 2024-03-09T03:43:57.366Z
Size : 36X96MM_220-240V
UnitCount : 1
UnspscCode : 41113600