Cart 2 india

Specification
Brand : JZGDX
BulletPoint : Oscilloscope Probes
BulletPoint1 : For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately)
BulletPoint2 : General-purpose probe for most surface roughness analyzing applications
BulletPoint3 : 90-degree conical diamond stylus for two-dimensional tracing
BulletPoint4 : 10 micrometer (0.0004") radius stylus for use with rough surfaces
BulletPoint5 : Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters
Color : CT 1000A
ExternallyAssignedProductIdentifier : 9495569320996
ExternallyAssignedProductIdentifier1 : 783250701483
ExternallyAssignedProductIdentifier2 : 0783250701483
ExternallyAssignedProductIdentifier3 : 00783250701483
IncludedComponents : REMOTE PROBE
ItemName : SDM-A Digital Ammeter, Slim Compact, LED Panel Meter (Color : CT 1000A, Size : 36X96MM_220-240V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-accessories
Manufacturer : JZGDX
MeasurementAccuracy : 1
ModelNumber : JZGDX
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZGDX
ProductDescription : Oscilloscope Probes
General
Designed to monitorize current of electrical charge of any system.
Usage and Working Principle
Make the connections according to the diagram. Make the connections of current transformers used for ampermeter before the electrical chargewhich required to measure in the system.
Current transformers don't sense the current of electrical charge which connected before them. Put max 5A charge for SDM-A36, SDM-A48, SDM-A72 and SDM-A96 types. Otherwise, device might be damaged or might give error.
Push "menu" button when the power is on. Set the current transformer ratio by "up"-"down" buttons and re-push "menu" to record your setting. You can see the current of system.Current transformers which used for direct ampermeters are in the same box with device and current ratio is already fixed, in this case, there is no menu for record.
Maintenance
Switch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical might damage the device.
Make sure device works after cleaning.
Warnings
Please use the device according to the manual.
Don't use the device in wet.
Include a switch and circuit breaker in the assembly.
Put the switch and circuit breaker nearby the device, operator can
easily.
Mark the switch and circuit breaker as releasing connection for device.
Specifications
Operating Voltage(Un)....: 150V - 270V AC
Operating Frequency.......: 50/60 Hz.
<;4VA
Operating Temperature..: -20°C.....+55°C
Measurement Range.......: 100mA - 5.5A
Measurement Precision..: ±%1
Display..................................: 20mm(96),14mm(72)
9mm(36 and 48)display
Connection Type..............: Plug-in terminal
Cable Diameter.................: 1,5mm²
Weight................................: Max. 220gr.
Panel Hole Sizes................: 91x91mm(96)
68
ProductSiteLaunchDate : 2024-03-09T03:43:54.058Z
Size : 36X96MM_220-240V
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41111601