Cart 2 india

Specification
Brand : JZGDX
BulletPoint : Oscilloscope Probes
BulletPoint1 : Oscilloscope Probes
BulletPoint2 : Red line: The positive pole of the power supply needs to be connected to the positive pole of the power supply within the DC range of 3.5-30V.
BulletPoint3 : Black line: Common negative electrode, which is both the power supply negative electrode and the reference negative electrode for measurement.
BulletPoint4 : Yellow line: measurement signal input positive pole
BulletPoint5 : Note: The meter needs to be powered independently. The power supply range is DC 3.5-30V. When the power supply is connected between the red and black wires, the meter will display 0.000. At this time, the voltage to be measured can be connected between the yellow wire and the black wire. Voltage range is DC 0-33.000V
Color : 3CT 1000A
ExternallyAssignedProductIdentifier : 9495569320804
ItemName : SDM-A96T Digital Three Phase Ammeter, Slim Compact, LED Panel Meter (Color : 3CT 1000A, Size : 96 * 96MM_220-240V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-accessories
Manufacturer : JZGDX
MeasurementAccuracy : 1
ModelName : JZGDX
ModelNumber : JZGDX
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZGDX
PowerSourceType : Ac
ProductDescription : Oscilloscope Probes
General
Designed to monitorize current of electrical charge of any system.
Usage and Working Principle
Make the connections according to the diagram. Make the connections of current transformers used for ampermeter before the electrical charge which required to measure in the system. Current transformers don't sense the current of electrical charge which connected before them.
Put max 5A charge.Otherwise, device might be damaged or might give error.
Push "menu" button for2 seconds when the power is on. Set the current transformer value by "up"-"down" buttons and re-push "menu" button for 2 seconds to record your setting. You can see the current of system.
Maintenance
Switch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical might damage the device.
Make sure device works after cleaning.
Warnings
Please use the device according to the manual.
Don't use the device in wet.
Include a switch and circuit breaker in the assembly.
Put the switch and circuit breaker nearby the device, operator can
easily.
Mark the switch and circuit breaker as releasing connection for device.
Specifications
Operating Voltage(Un)....: 150V - 270V AC
Operating Frequency.......: 50/60 Hz.
<;4VA
Operating Temperature..: -20°C.....+55°C
Meas.Range(L-N)...........: 5-300V AC(L1 must be
least 140V)
Meas.Range.....................:100mA-5.5A AC
Measurement Precision..: ±%1
C.T. Ratio..........................: 5/5A......5000/5A
Display..............................: 3*4 digit 14mm display
Connection Type..............: Plug-in terminal
Cable Diameter.................: 1,5mm²
Weight................................: Max. 300gr.
Panel Hole Sizes................: 91x91mm
Mounting...........................: Panel front mounted
<;2000meter
ProductSiteLaunchDate : 2024-03-09T03:44:02.447Z
Size : 96*96MM_220-240V
UnitCount : 1