Specification Brand : Garosa BulletPoint1 : [Protected ] : Fully shielded welded bnc connector minimizes interference, while copper plated gold pin enhances test versatility BulletPoint2 : [Excellent Performance] : Features interchangeable probe tip for high sensitivity and function, ensuring accurate results and confidence in usage BulletPoint3 : [High Bandwidth] : Universal oscilloscope probe with 10:1 and 1:1 switchable bandwidth up to 500mhz, suitable for a wide range of scopes BulletPoint4 : [Design] : Made from impact- abs material, this passive oscilloscope probe is scratch- and BulletPoint5 : [Low Power Consumption] : Kit with input impedance of 1mω:10mω offers energy-saving and convenience during work Color : As Picture Show ItemName : Oscilloscope Probe 500mhz, Universal Oscilloscope Probe Kit 10:1/1:1 Switchable 50MHz Bandwidth Interchangeable High Sensitivity BNC, Oscilloscopes ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 20 centimeters ItemPackageDimensions_Width : 13 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : oscilloscope-probes Manufacturer : Garosa ModelNumber : Garosafscmwrbou9 PartNumber : Garosafscmwrbou9 ProductDescription : Spec: Item Type: Oscilloscope Probe Material: ABS Attenuation: 1:10 Input Impedance: 1MΩ:10MΩ Frequency: 500MHz or 10MHz Input Capacitance: 1X: 45pF-65pF, 10X: 8.5pF-18.5pF Compensation Range: 5pF-30pF System Bandwidth: 1X: DC-10MHz, 10X: DC-500MHz Maximum Working Voltage Input: 1X:
How to Use: Before any measurements are taken using a probe, its compensation should first be checked and adjusted to match that of the channel input. Most oscilloscopes have a reference available on the front panel specifically for the purpose of probe compensation. Connect the probe to the source to display a 1 KHz test on the oscilloscope. Set the probe to the 10X position.
Package List: 1 x Oscilloscope Probe 4 x Identification 2 x Insulation 1 x Spring Needle