 
                                    Simulation Parameter: 
Number of input channels: 2 channels 
Sampling channel: 1 channel 
Maximum sampling frequency: 16MHz 
Maximum analog bandwidth: 3MHz 
Input voltage range: -10V to +10V 
Sensitivity: 78mV 
Maximum vertical resolution: 256 levels 
Digital Parameter: 
Number of channels: 8 
Input voltage: 0V-5.3V 
Input low level: <0.8V 
Input high level:> 1.4V 
Support protocol: SPI, IIC, UART, SMBus, I2S, CAN, parallel, custom, search, asynchronous, 1-Wite, PS/2 
Communication Interface Parameter: 
USB parameters: USB2.0 high speed 480Mbps 
System Requirements: 
Supported operating system Win2000 / XP / Vista / WIN7 (32-bit) 
Celeron 4 2.0G or Pentium 4 1.8G processor 
Need USB2.0 high-speed interface, does not support full-speed USB2.0 or USB1.1 
Memory requirement 128M or higher 
Requires 2G or more hard drive 
You need to install Framework 3.5 SP1 
Note: If your system is WINDOWS XP, please check whether your computer has the component ".NET 3.5 SP1", if not, please go to the Microsoft website to download and install it. 
Feature: 
1.Dual input oscilloscope (single channel, 16Msps, 3MHz bandwidth) 
2.Eight channel logic analyzer 
3.Data logger 
4.Two-channel voltmeter 
5.Mixed signal oscilloscope and logic analyzer 
6.Frequency meter 
7.Remote control 
8.PWM controller 
9.Frequency generator 
10.I2C controller 
11.Pulse/edge counter 
12.Eight bit digital channel + 1-bit analog channel logic analyzer, supports multiple protocols 
Package included: 
1 x Machine 
1 x Test Clamp Wire (with 10 test clamps) 
1 x USB Cable
ProductSiteLaunchDate : 2024-08-31T09:56:33.156Z
UnspscCode : 32101600