Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : DKSGG
BulletPoint1 : Fitment: Awnings for RVs and Campers include A&E 8500 Awnings A&E 9000 Awnings.
BulletPoint2 : Material: Made of high quality plastic with sturdy construction. Compared with metal material, It has less friction with the awning arms.
BulletPoint3 : Function: Support and stabilize the awning and keep the roof tensioned when opening.
BulletPoint4 : Installation: Insert the new Slider Catch through the hole in the main arm from the front. Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece.
BulletPoint5 : Include: 2 x slider catches, 2 x springs.
BulletPoint6 : Easy, DIY installation
BulletPoint7 : Solera 16 GA Power Awning Harness for power awning replacement switches
Color : White
ExternallyAssignedProductIdentifier1 : 711523569393
ExternallyAssignedProductIdentifier2 : 0711523569393
ExternallyAssignedProductIdentifier3 : 00848150013194
FabricType : Vinyl
FitType : Universal Fit
IncludedComponents : Wire Harness
ItemName : 830472P002 RV Awning Arm Slider Catch Kit Compatible with Dometic A&E 8500 9000 (2 Slider Catch)
ItemPackageDimensions_Height : 16.3 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rv-awnings
Manufacturer : DKSGG
Material1 : Plastic
Material2 : Metal
ModelName : 830472P002 RV Awning Arm Slider Catch Kit
ModelNumber : 830472P002
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode1 : found in image
OperationMode2 : Manual
PackageLevel : unit
PartNumber : 830472P002
Pattern : Solid
PowerSourceType : NO
ProductDescription : If one side of your RV awning arm is missing catch sliders or small springs,
then he can't work, this product can easily solve this problem.
Include:2 slider catch plate
Applicable to A&E 8500 Awning
Applicable to A&E 9000 Awning
Easy installation.
Step 1. Remove the old slider clips
With the awning extended, insert a small flathead screwdriver into the gap between the back and front of the clip.
Pry open the back side and remove the slider clip.
Step 2. Install the new slider clip
Insert the new slider clip into the hole on the main arm from the front.
Then insert the lip of the back into the lower sill Place the spring between the back of the slider clip
and the main arm Snap the back of the slider into the front piece,
being careful not to let the spring out.
RequiredProductComplianceCertificate : Qualified
SafetyWarning : Always keep hands and face away from moving parts during installation and use. Do not force the awning to extend or retract if it is stuck. Ensure the awning is properly anchored and secured before use, especially in windy conditions. Keep sharp objects away from the awning to prevent damage or injury. Do not use the awning in severe weather conditions.
StreetDate : 2016-03-01T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 30000000
WarrantyDescription : 1 Year