Cart 2 india

Specification
Amperage : 1 amps
Brand : Philipreba
BulletPoint1 : 【Strong and Reliable】: The case adopts premium PP and ABS materials with the injection molding process, featuring outstanding impact prevent, water prevention, and high strength. The 304 stainless steel chains improve the linkage between the upper and lower housing. Both make the case support up to 110 lbs.
BulletPoint2 : 【Innovative Design】: The innovative pressure relief valve allows the case to quickly balance the internal and external air pressures, ensuring a smooth&safe opening of the case when traveling at different altitudes.
BulletPoint3 : 【DIY Operation】: The 3 layers of fully customizable cubed foam with each having 0.6*0.6 inches pre-cut size allow you to DIY shapes suitable for your valuables.
BulletPoint4 : 【Easy to Carry】: With two directional pulleys, a pull rod (16.5" in length) with a snap horizontal lock buckle, and two soft handles on the top and side of the case, you can easily and comfortably move this case.
BulletPoint5 : 【Considerate Design】: The PP wheel sleeves can 180° better protect the wheels. The ABS backboard can avoid scratching your case when being placed on the ground. And you can add connector inside the case to install hardware panels for your specific usage.
BulletPoint6 : Note: For your better experience, charge the battery to more than 60% before use. There is no charging display during use. It is recommended to continue charging ring camera for 1 day and then observe the battery power.
Color : Orange
CompatibleDevices : V Mount Battery
CompatiblePhoneModels : Sony
ConnectivityTechnology : Wireless
ConnectorGender : Male-to-Male
ConnectorType : USB
ConnectorType1 : Barrel Connector
ConnectorType2 : Wireless
CurrentRating : 1 amps
Department : Womens
ExternallyAssignedProductIdentifier1 : 715377740540
ExternallyAssignedProductIdentifier2 : 0715377740540
FrequencyRange : 60 hertz
IncludedComponents : 2.5mm to 2.1mm DC adaptor
IncludedComponents1 : 1 x V Mount Battery Plate
IncludedComponents2 : 2 x 1/4" Screw
IncludedComponents3 : 1 x Hex Spanner
InputCurrent : 1 amps
InputVoltage : 240 volts
ItemLength : 312 inches
ItemName : Philipreba 22" Protective Roller Camera Hard Case, Protective Camera Case with IP67 Water-prevent, Transport Roller Gear, Camera, Tools, Equipment Hard Case (Orange)
ItemPackageDimensions_Height : 22.098 centimeters
ItemPackageDimensions_Length : 5.0038 centimeters
ItemPackageDimensions_Width : 10.3886 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : camera-cases
Manufacturer : Ayotu
Material : Aluminum
Material1 : Polypropylene (PP)
Material2 : Acrylonitrile Butadiene Styrene (ABS)
Material3 : 304 Stainless Steel
MaximumWeightRecommendation : 160 grams
ModelName : Protective Roller Camera Hard Case
ModelNumber : Protective Roller Camera Hard Case
MountingType : Wall Mount
NumberOfItems : 2
OutputVoltage : 5 volts
PartNumber : RJK00001
Pattern : No
PowerPlugType : no_plug
PowerSourceType : Corded Electric
ProductDescription :

Details

Humanized Latches: The locks adopt a pressure-based physical principle to enhance their service life, ensure convenient pressing, and firmly secure the case so that it cannot be opened without human intervention. 

Two Padlockable Holes: The two pad-lockable holes of 0.27" in diameter allow you to add combination locks(not included) to improve its safety and prevent theft.     

Round Corners: The round corners can better care for your skin without hurting your hands and allow for easy cleaning.

Application

It is suitable for storing your camera equipment, lenses, computers, watches, digital communication products, electronics, tools, and other valuables.

Operation Method of Checkerd Sponge

1. Draw a shape with a pen(not included) or directly press out the shape.

2. Tear out small squares.

3. Tear out the desired shape.

4. Modify the shape properly.    

Specifications

Color: Blue/ Black/ Orange/ Green

Pattern: Solid

Style: Modern

Shape: Rectangular

Water-prevent Level: IP67

Type: Storage Box

Closure Type: Press Lock

Target Audience: Unisex Adults

Process: Injection Molding

Material: PP, ABS, 304 Stainless Steel

Care Instructions: Wipe with a Wet Cloth

Load-bearing Capacity: 50kg/110 lbs

Applicable Temperature: -10-45℃/14-113℉

Pre-cut Size: 1.5*1.5cm/0.6*0.6inch

Padlockable Hole Diameter: 7mm/0.27inch

Pull Rod Length: 42cm/16.5inch

Case Size: 35.5*23.5*56cm/14*9.3*22inch

Package Size: 57*24.5*37cm/22.44*9.64*14.56inch

Net Weight: 5.3kg/11.68 lbs

Gross Weight: 6.5kg/14.33 lbs

Package Included

1* Protective Camera Case

3* Checkered Foams

1* Flat-padded Foam

1* Top Egg Crate Layer Foam 

ProductDescription1 : Standard V Mount Plate: Compatible with a wide range of standard V mount batteries on the market
ProductDescription2 : USB-C Input/Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A (PD 3.0/QC 3.0/FCP/AFC)
ProductDescription3 : DC Output: 8V/3A (5.5 x 2.1 mm)
ProductDescription4 : D-Tap Output: 14.8V/10A
ProductDescription5 : Note: Please pay attention to use the same adapter cable as the v mount plate interface voltage to avoid short circuit
ProductSiteLaunchDate : 2022-05-12T08:43:56.372Z
Size : N21-D1
StrapType : Shoulder
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
UnitCount : 1
UnspscCode : 45121600
Voltage : 5 volts
WarrantyDescription : 1 year manufacturer
Wattage : 5 watts