Cart 2 india

Specification
Brand : Ford
BulletPoint : Genuine Mazda 0000-FZ-113E-01 ATF Type-Fz
BulletPoint1 : Transfer case fluid is recommended by Ford Motor Company for use in transfer cases driving front axles on Ford, Lincoln and Mercury AWD/4X4 vehicles
BulletPoint2 : For use in transfer cases where MERCON ATF was previously recommended; do not use in AWD vehicles equipped with a transaxle
BulletPoint3 : Do not use in automatic transmissions, manual transmissions, power take off units (PTU) or fluid couplers
BulletPoint4 : Do not use in torque on demand transfer cases
BulletPoint5 : Check owner guide and transmission fluid charts for application
Color : black
ContainsLiquidContents : 1
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7426939420666
ExternallyAssignedProductIdentifier1 : 031508521339
ExternallyAssignedProductIdentifier2 : 0031508521339
ExternallyAssignedProductIdentifier3 : 00031508521339
FlashPoint : 269 degrees_celsius
IncludedComponents : MERCON LV Automatic Transmission Fluid - 1 Quart
IsExpirationDatedProduct : 1
ItemDisplayWeight : 3 pounds
ItemForm : Liquid
ItemName : Genuine Ford Fluid XL-12 Transfer Case Fluid - 1 Quart , black
ItemPackageDimensions_Height : 22.4028 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 10.6934 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : transmission-fluids
LiquidVolume : 1 quarts
Manufacturer : Ford
Material : Wax
ModelName : XL-12
ModelNumber : XT10QLVC
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 0000-FZ-113E-01
PackageLevel : unit
PartNumber : XL-12
ProductDescription : TYPE OF USE All types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Fluidity specially designed for anti-locking brake systems (ABS). PERFORMANCE STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3 SAE J 1703 ISO 4925 (5.1, 4 & 3) Long life fluid: The high wet boiling point (187°C / 369°F), superior to DOT 4 (155°C / 311°F mini) and DOT 3 (140°C / 284°F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use. Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40°C / -40°F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion. RECOMMENDATIONS Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to avoid absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. Drain Interval: 12 to 24 month as per manufacturers’ recommendations. PROPERTIES 100% synthetic fluid, polyglycol bases. Color Yellow Dry boiling point 269 °C / 516 °F Wet boiling point 187 °C / 369 °F Viscosity at -40°C (-40°F) 820 mm²/s Viscosity at 100°C (212°F) 2.1 mm²/s Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.
ProductSiteLaunchDate : 2013-02-25T00:00:01-08:00
RecommendedUsesForProduct : Automotive
Size : 1 Quart
SpecificUsesForProduct : Vehicle Brake System Maintenance
StreetDate : 2013-02-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 32
UnspscCode : 15121500
UpperTemperatureRating : 516 degrees_fahrenheit
Viscosity : 820 centipoise at -40 degrees Celsius
WarrantyDescription : Manufacturer Warranty