Alxum 3-in-1 USB C to SATA & IDE Adapter with Hard Drive Cloning - 5Gbps High Speed Data Transfer, Supports Simultaneous Reading of Two Drives?SATA III & IDE 133 HDD/SSD? Included 12V2A Power Adapter

Customer rating 4.3 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹17130 -34% ₹11300/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Alxum
BulletPoint1 : [3-in-1 USB-C to SATA and IDE SSD Enclosure]This Device Enclosure Supports the SATA 3 and IDE 133 interface protocols. It can read two hard drives simultaneously and display the drive letters of two drives. It enables seamless data transfer between traditional and modern devices. It is an ideal choice for data access, device backup, or data management and migration. The real-time LED status indicator ensures full control over the operation.
BulletPoint2 : [One-Click Cloning Function]Alxum SATA and IDE Adapter supports offline cloning. Just wait for the blue light to flash (indicating 25%) and you can start the cloning process. It supports cloning from IDE (Drive A)/SATA2 (Drive B) to SATA (Drive C).Note:1. It is not recommended to use an IDE hard drive for cloning.2. When using the offline cloning function, you must connect the DC power supply and unplug the upstream USB cable.3. Make sure the capacity of the target disk is greater than that of the original disk.
BulletPoint3 : [5Gbps Transmission]Equipped with a Type - C interface, there's no need to distinguish between the front and back sides, offering an ultra - high - speed transmission experience of up to 5Gbps. Transferring a large 5GB file takes only a few seconds, significantly boosting efficiency!It is also backward - compatible with USB 2.0 and USB 1.1. It supports UASP, with a speed 70% faster than that of traditional USB 3.0.
BulletPoint4 : [Easy to Use]No drivers or software are required. It is plug-and-play and supports hot-swapping. It will enter sleep mode after 30 minutes of inactivity. It supports 2.5" or 3.5" SATA SSD and 3.5" IDE SSD.Supports SATA/ATAPI LBA48 addressing mode:The SATA1(C) port: It uses an independent transmission channel.The SATA2 (B) and 3.5" IDE (A) ports: They share the same transmission channel (you can select one of them via the switch).
BulletPoint5 : [Package Content]1×USB-C to SATA IDE Adapter, 1× USB Type-C to Type-C Cable, 1×4-pin IDE Power Cable, 1× 12V2A Power Cable,1×User Manual. Attention:1. 1. An external hard drive enclosure for a 3.5 - inch hard drive needs an external power supply.2.IDE hard drives are not recommended for cloning due to their older technology and potential bad sectors.3. When connecting a 3.5-inch IDE hard drive, you need to connect the 4-Pin power pins.
Color : Space Grey
CompatibleDevices : Laptop
CompatibleDevices1 : Laptop
CompatibleDevices2 : Personal Computer
CompatibleDevices3 : Smartphone
CompatibleDevices4 : Desktop
CompatibleDevices5 : game console
ConnectivityTechnology : SATA
ConnectorType : USB Type C
ConnectorType1 : USB Type C
ConnectorType2 : USB Type A
CustomerPackageType : Standard Packaging
DataTransferRate : 100 megabits_per_second
DigitalStorageCapacity : 4000 GB
ExternallyAssignedProductIdentifier1 : 794504762525
ExternallyAssignedProductIdentifier2 : 794504324051
ExternallyAssignedProductIdentifier3 : 0794504762525
ExternallyAssignedProductIdentifier4 : 0794504324051
ExternallyAssignedProductIdentifier5 : 00794504324051
FinishType : Metallic
FormFactor : 2.5-inch
HardDiskFormFactor : 2.5 inches
HardwareInterface1 : sata_1_5_gb
HardwareInterface2 : sata_3_0_gb
HardwareInterface3 : sata_6_0_gb
HardwarePlatform : Mac
IncludedComponents : OWC 5-Piece Mini Toolkit - Logic Board Removal Tool - 4 Rubber Grommets - 4 Hex Screws - Mac Mini flex cable - Data Doubler for Mac mini (2011-2012) Installation Guide (Download Only)
InstallationType : Internal Hard Drive
ItemDisplayDimensions_Length : 2.7 centimeters
ItemName : Alxum 3-in-1 USB C to SATA & IDE Adapter with Hard Drive Cloning - 5Gbps High Speed Data Transfer, Supports Simultaneous Reading of Two Drives(SATA III & IDE 133 HDD/SSD) Included 12V2A Power Adapter
ItemPackageDimensions_Height : 13.208 centimeters
ItemPackageDimensions_Length : 8.9916 centimeters
ItemPackageDimensions_Width : 10.6934 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-drive-enclosures
Manufacturer : Tech-Top Technology Limited
Material : Aluminum
ModelName : FBA_OWCDIDIMM11D2
ModelNumber : S1235C
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : S1235C
Platform : macintosh
PowerPlugType : type_a_2pin_na
ProductDescription : 3-in-1 USB C to SATA & IDE Adapter with Hard Drive Cloning - 5Gbps High Speed Data Transfer, Supports Simultaneous Reading of Two Drives(SATA III & IDE 133 HDD/SSD) Included 12V2A Power Adapter
ProductSiteLaunchDate : 2025-01-13T06:16:42.339Z
SpecificUsesForProduct : Gaming and Multimedia
SpecificUsesForProduct1 : PC
SpecificUsesForProduct2 : Laptop
SpecificUsesForProduct3 : Tablet
SpecificUsesForProduct4 : Hard Drive
SpecificUsesForProduct5 : SSD
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : 1 Year Manufacturer

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
4
4*
4
3*
1
2*
0
1*
0

Read all 9 customer reviews

Truly exceeded my expectations.

It's usable but lacks some key features.

Very functional and easy to use.

Will definitely recommend to others.

Delivers what it promises and more.

Well-made and looks great.

Happy with the quality and performance.

Delivers what it promises and more.

Absolutely fantastic product!

Have an opinion on this page? Let's hear it.