Cart 2 india

Specification
AutoPartPosition : right
Brand : Collgene
BulletPoint1 : Easy to install. No mods. No drilling needed; Requires only a wrench or socket for installation
BulletPoint2 : Sturdy built with thick metal, ensures it a stable mount without vibration while driving. Sold as a pair (Driver & Passenger side); May be used for CB Antenna or Whip Flag
BulletPoint3 : Does NOT affect the opening or closing of the hood while the lights are mounted
BulletPoint4 : To install, remove bolt closest to front bumper, attach mount with other hole offset, replace/tighten that bolt, remove rear bolt, swing mount over into place, replace bolt and tighten. Doing it this way keeps the hood from shifting around so you don’t have to readjust it in relation to latch
BulletPoint5 : Perfect Fitment: Work perfectly with small pod lights work lights within 2” to 5” and sit at exact position, remaining sufficient clearance for hood to fully open without blocking windshield wiper
Color : popular
ExternallyAssignedProductIdentifier1 : 737983052374
ExternallyAssignedProductIdentifier2 : 0737983052374
FinishType : Powder Coated
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : 2 pcs brackets
ItemDepth : 1.5 inches
ItemName : Engine Hood Hinge Ditch LED Mount Brackets for Auxiliary Offroad Pod Work Light Holes Diameter 1 inch Fit Cowl Panel at Windshield Base for Toyota Tacoma 2005-2015
ItemPackageDimensions_Height : 25.8 centimeters
ItemPackageDimensions_Length : 5.3 centimeters
ItemPackageDimensions_Width : 10.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-headlight-brackets
Manufacturer : Collgene
Material : Metal
ModelName : ditch light brackets
ModelNumber : HingeDitch010826
MountingType : Wall Mount
NumberOfItems : 2
PartNumber : HingeDitch010826
ProductDescription : THESE GO BETWEEN BOLTS AND HINGE!

To install, remove bolt closest to front bumper, attach mount with other hole offset, replace/tighten that bolt, remove rear bolt, swing mount over into place, replace bolt and tighten. Doing it this way keeps the hood from shifting around so you don’t have to readjust it in relation to latch.Durable Coating: Made of quality powder coating, no fading or chipped paints, anti-rust

Ditch Light Mounting Brackets:

Size: 2.75” X 8.1”
Light mount hole size: 10mm
Hood mount hole size: 12mm
Metal Thickness: 3mm
Finish: Black powder coating
ProductSiteLaunchDate : 2024-09-27T07:00:00.000Z
Size : normal
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 31162403