Cart 2 india

Specification
AirFlowCapacity : 326 cubic_feet_per_minute
Brand : PowMr
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 : 【Wide Application】: Installing the solar connector cable is tool-free, thanks to its user-friendly design. The connectors are easy to attach and detach, allowing for quick and simple installation without the need for specialized tools or equipment, and is compatible with various solar cables: 14-10AWG (2.5mm² - 6mm²).This ease of installation makes the splitter wire suitable for both professionals and DIY enthusiasts.
BulletPoint6 : Widely Used: This solar powered exhaust fan is easy to install and can be mounted in a window or wall, fits for greenhouse, shed, chicken coops, garages, gardens, attics, barns, basements, RV, window exhaust, outdoor camping and more
BulletPoint7 : Usage Advice: The solar fan is solar powered, it can't storage power. Please expose it to the full sun, ensure there is no shadow and press the On/Off switch, it will surprise you. The solar powered fan will automatically shut down when the sun set
BulletPoint8 : Easy to Install: No mounting hardware with the solar panel. Pre-drilled holes on the back of the solar panel to compatible with multiple brackets, please purchase the mounting hardware or brackets to meet your own demand
ChargingPortType : USB Type-A
Color : R-60A
ConnectorType : Usb
ControllerType : Button Control
ControlMethod : remote
CustomerPackageType : Standard Packaging
Efficiency : 24%
ElectricFanDesign : exhaust_fan
ExternallyAssignedProductIdentifier1 : 655160052880
ExternallyAssignedProductIdentifier2 : 0655160052880
ExternallyAssignedProductIdentifier3 : 00860002597430
FinishType : High Speed Exhaust Fan
GpsrSafetyAttestation : 1
IncludedComponents : 15W high efficiency solar panel, 6 Inch high speed DC fan
IndoorOutdoorUsage : indoor
IsAssemblyRequired : 1
IsCordless : 1
ItemName : PowMr 60a Charge Controller - Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current / Capacity and Timer Setting ON/Off with 5V Dual USB
ItemPackageDimensions_Height : 19.1 centimeters
ItemPackageDimensions_Length : 5.2 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : renewable-energy-charge-controllers
Manufacturer : PowMr
Material : Gel
Material1 : Aluminum
Material2 : Stainless Steel
MaximumCurrent : 6.1 amps
MaximumPower : 150 watts
MaximumVoltage : 12 volts_of_direct_current
ModelName : Solar Connector Cable
ModelNumber : Solar Connector Cable
MountingType : Wall Mount
NoiseLevel : 36 decibels
NumberOfBlades : 5
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPowerLevels : 1
OperatingTemperature : -35 degrees_celsius
OutputVoltage : 18 volts_of_direct_current
PartNumber : MXRPV-001
Pattern : Solar Exhaust Fan Pro
PowerSourceType : solar_powered
ProductDescription : NOTE :Please Make sure your battery has enough voltage before first installation.(at least 60%)

System Voltage: 12V 24V Auto
Charge current: 60A
Max input power: 780W(12V system); 1560W(24V system)
USB output: Dual USB output, 5V/2.5A
Max input voltage: 24V(12V system); 48V(24V system)
Batteries: Only fit for OPEN, AGM, GEL
Float charge: 13.7V(defaul, adjustable)
Discharge reconnect voltage: 12.6V(defaul, adjustable)
Float charge: 13.7V(defaul, adjustable)
Discharge reconnect voltage: 12.6V(defaul, adjustable)
Discharge stop voltage: 10.7(defaul, adjustable)
Turn ON/OFF light voltage: Solar pannel 8V.
Temperature: -35℃~+60℃
Self-consume: <10mA
Size/Weight: 193mm*51mm*98mm/390g

Load mode:

1. 【0H】Light control mode. [controller recognize voltage auto, if solar panel's voltage under 8V, Load will turn on]
2. 【1-15H】Light controller+ Set an specific time to turn off your load.
3. 【24H】 Load always turn on. [except your battery's voltage is too low to read]

MENU：1. Press to browse parameters. 2.Press and hold about 3 seconds to enter detail setting

UP: Press to increase value

DOWN: Press to decrease value

TIPS OF INSTALLTION: (ALWAYS CONNECT BATTERY FIRST!!)

Step 1, Screw the adjustment screw counter clockwise until the plates moves down.
Step 2, Please peel off the coating of the cable tip by about 8 to 10 mm, then insert the wire into the new opening between the plate and the "top" of the Terminal hole, not under it.
Step 3, Screw the adjuster clockwise and the plate will move upwards thereby squishing the wire in the Terminal hole, Make sure all connections are tight.
ProductSiteLaunchDate : 2019-10-23T07:00:00.000Z
RecommendedUsesForProduct : Ventilating
Runtime : 67000 hours
Size : 60a charge controller 12V
SpecificationMet : 15W Solar Panel Fan Kit
Speed : 2800 rpm
Style : Solar powered exhaust fan
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Push Button
UnitCount : 1
UnspscCode : 26111700
Voltage : 24 volts_of_direct_current
Wattage : 15 watts