Cart 2 india

Specification
Brand : Light Source
BulletPoint1 : The Mega-Coupler Grounder solves problems you didn’t even know you had! Just think of all the electrical items that are fastened to a pipe or truss rig. Many trusses are suspended with polymetric materials, that do not conduct electricity, such as nylon or polyester slings.
BulletPoint2 : The Mega-Coupler Grounder is intended to provide a ground connection for additional electrical safety for any mechanical structure fabricated from truss, pipe or round tubing ranging from 1 5/8” OD to 2” OD.
BulletPoint3 : The Mega-Coupler Grounder is intended to provide a ground connection for additional electrical safety for any mechanical structure fabricated from truss, pipe or round tubing ranging from 1 5/8” OD to 2” OD. The Mega-Coupler Grounder can be used with either copper or aluminum grounding conductors ranging from 14 gauge to 1/0. The grounding conductor should be sized for the maximum electrical power utilized on the total electrical equipment connected to the pipe/truss assembly.
BulletPoint4 : Installation is easy. Simply wrap the Mega-Coupler Grounder’s base and link around the pipe or truss tube, swing the swivel bolt assembly into the notch in the link and tighten the clamping wing nut to 40-foot pounds of force (480-inch pounds of force)
BulletPoint5 : 5. Featuring a rotating speed of up to 700 rpm, the LED Hologram Projector provides a captivating visual experience that engages your audience
Color : Silver
ExternallyAssignedProductIdentifier : 7355814977523
ItemName : The Light Source Mega-Coupler Grounder, Silver
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : stage-lighting-accessories
Manufacturer : The Light Source
ModelName : MCGM
ModelNumber : MCGM
NumberOfItems : 1
PartNumber : MCGM
ProductDescription : The Mega-Coupler Grounder solves problems you didn’t even know you had! Just think of all the electrical items that are fastened to a pipe or truss rig. Many trusses are suspended with polymetric materials, that do not conduct electricity, such as nylon or polyester slings. Some pipe or truss assemblies are suspended from a wooden structure. If there is an electrical wiring failure, what is the path to ground? What might happen to anyone who comes in contact with an energized truss/pipe assembly? The new patent pending Mega-Coupler Grounder is ETL listed to UL standard 467 in both the USA and Canada as a grounding clamp for pipe and truss structures. The Mega-Coupler Grounder was ETL tested by carrying over 5,000 amps to ground without failure! Properly installed with a grounding conductor connected to the electrical system ground, the Mega-Coupler Grounder solves these hazardous problems! The Mega-Coupler Grounder is intended to provide a ground connection for additional electrical safety for any mechanical structure fabricated from truss, pipe or round tubing ranging from 1 5/8” OD to 2” OD. The Mega-Coupler Grounder can be used with either copper or aluminum grounding conductors ranging from 14 gauge to 1/0. The grounding conductor should be sized for the maximum electrical power utilized on the total electrical equipment connected to the pipe/truss assembly. The Mega-Coupler Grounder device employs 6061 aluminum and stainless-steel corrosion resistant materials of construction to accommodate both indoor and outdoor above grade installations. Installation in the field must be in accordance to NFPA NEC 70. Installation is easy. Simply wrap the Mega-Coupler Grounder’s base and link around the pipe or truss tube, swing the swivel bolt assembly into the notch in the link and tighten the clamping wing nut to 40-foot pounds of force (480-inch pounds of force) [54.2 N m] maximum. Fasten the grounding conductors by tightening the hex bolts to 12.5-foot
ProductSiteLaunchDate : 2020-01-06T08:00:00.000Z
Size : 150cm
UnspscCode : 52160000