Cart 2 india

Specification
AutoPartPosition : right
Brand : LuckyBike
BulletPoint : DOT approved turn signals are exact replacements of complete OEM assemblies, at a fraction of the cost
BulletPoint1 : Universal Turn Signals; Works With All 12V DC Systems
BulletPoint2 : Bendable Rubber Stem Reduces Damage and Breakage From Bumps, Drops or Falls
BulletPoint3 : High Impact Plastic Housing and Lens
BulletPoint4 : Great Signal Alternative for Suzuki GSXR, Honda CBR, Kawasaki Ninja, and Yamaha YZF as well as Ducati, KTM and More
BulletPoint5 : Can Be Used on Many Different Powersports Vehicles, Side by Sides, and Trailers
Color : Clear/Black
CompatibleWithVehicleType : Motorcycle
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier1 : 029882842447
ExternallyAssignedProductIdentifier2 : 0029882842447
FitType : Universal Fit
IncludedComponents : K&S Technologies 25-2025
ItemName : Compass LED Stalk Turn Signal Universal Light Motorcycle Clear Black Blinker
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 9 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-turn-signal-assemblies
Manufacturer : LuckyBike
ModelName : K&S Technologies 25-2025
ModelNumber : 25-2025
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 25-2025
PackageLevel : unit
PartNumber : 15-008-LED-CL-BK
ProductDescription : Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. If you have a 3 Wire System, the wire for the running lights are not used in this installation.2 Wire SystemThe other two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). Attach the YELLOW Turn Signal Wire to the Bikes Positive Signal Wire and the BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be hand tight and not forcefully clamped down, we recommend using Thread locker on all bolts used in a motorcycle application (Blue/Medium).
ProductSiteLaunchDate : 2024-03-01T15:01:20.000-05:00
StreetDate : 2022-12-04T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172900
Voltage : 12 volts
WarrantyDescription : 30 days manufacturer's defects only