Cart 2 india

Specification
Brand : Integrity Hifi
BulletPoint : Integrity HiFi Tru- Lift Model 1 (Stainless Steel)
BulletPoint1 : 1. Power supply: DC6.5-15V (depending on the required output power), power adapter, switching power supply, or battery. The recommended current is above 3A.
BulletPoint2 : 2. The PCB circuit board size is reduced, the component layout is more reasonable, and the product service life is increased.
BulletPoint3 : 3. The left and right channels use a low-power audiophile-grade dedicated audio chip TDA1517P as the output stage, which truly provides effects.
BulletPoint4 : 4. Stable performance, high-fidelity 2.1 three-channel super bass 12V audio amplifier board
BulletPoint5 : 5. Wide range of applications, small size can be easily embedded in various occasions
BulletPoint6 : In the event of an overload, the device reports the fault to the processor, thus avoiding damage to itself.
BulletPoint7 : 5.The Subwoofer cut-off frequency: 26-160HZ
BulletPoint8 : In the event of an overload, the device reports the fault to the processor, thus avoiding damage to itself.
Color : Silver
CompatibleDevices : Turntable
ExternallyAssignedProductIdentifier : 9378325266199
ExternallyAssignedProductIdentifier1 : 627987044959
ExternallyAssignedProductIdentifier2 : 0627987044959
IncludedComponents : 3 height adjustable risers
ItemName : Integrity Hifi Tru- Lift Model 1 (Stainless Steel)
ItemPackageDimensions_Height : 25.4 centimeters
ItemPackageDimensions_Length : 7.7 centimeters
ItemPackageDimensions_Width : 17.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-ethernet-cables
Manufacturer : Integrity Hifi
Material : Stainless Steel
ModelName : Model 1
ModelNumber : PGNEX
MotorType : Manual
NumberOfItems : 1
PartNumber : TR1SS
PowerSourceType : Manual Winding
ProductDescription : These Canadian engineered and built lifters are machined from solid brass or stainless steel are currently considered among the world's best. Tru-lifts are the only auto tone arm lifters that gently lift your arm using an ingenious magnetic fluid damping system instead of a spring based systems that abruptly pop up your arm up risking potential damage to your valuable stylus. Each package contains three different height adjustable risers so they're compatible with any turntable.
ProductSiteLaunchDate : 2018-07-30T20:27:37.220Z
SignalFormat : Analog
Size : As shown
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52161548