Cart 2 india

Specification
AcceptedVoltageFrequency : 100v_240v_50hz_60hz
Brand : CTLAMP
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
ColorRenderingIndex : 10
ConnectivityTechnology : Normal bulb
ControllerType : Push Button
ControlMethod : remote
IndoorOutdoorUsage : indoor
ItemName : CTLAMP A+ Quality RLC-103 Replacement Projector Lamp Bulb with Housing Compatible with VIEWSONIC PG800HD PG800W PG800X Pro8510L Pro8520WL Pro8530HDL Pro8800WUL VS16370 VS16371 VS16372 VS16369
ItemPackageDimensions_Height : 5.5 inches
ItemPackageDimensions_Length : 5.9 inches
ItemPackageDimensions_Width : 5.1 inches
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
LightType : Incandescent
Manufacturer : CTLAMP
Material : copper
NumberOfItems : 1
ProductDescription : ELPLP85 V13H010L85 projector lamps & projector bulbs with housing

This lamp works with the following projectors:
for Epson EH-TW6600 EH-TW6600W ELP-LP85 H651a HC 3000 HC 3100 HC 3500 HC 3510 HC 3600 HC 3600e HC 3700 HC 3900 Home Cinema 3500 Powerlite Home Cinema 3000 Powerlite Home Cinema 3100 Powerlite Home Cinema 3500 Powerlite Home Cinema 3510 Powerlite Home Cinema 3600 Powerlite Home Cinema 3600e Powerlite Home Cinema 3700 Powerlite Home Cinema 3900
Please confirm whether it's the right lamp you want to buy before you place your order!

WARRANTY:
1. 150 days warranty, excluding the human damages and damages caused by the failure or malfunctioning of the projector and also not responsible for damage during transportation.
2. Replacement lamp will be sent after we confirm the damage

NOTICE: Buyers are responsible for Customs taxes and duties for importation (if any).
Please contact us if you have any questions.

We can provide:
1. Original Lamp with Housing;
2. Original Bare Lamp;
3. Compatible Lamp with Housing;
4. Compatible Bare Lamp.
Please contact us if you need.

To install a projector lamp with the housing, just follow the easy steps below:

1. Make sure the projector is unplugged and sitting on a flat surface
2. Loosen the screw holding the projector lamp module cover in place and remove the panel
3. Unplug the old projector lamp and remove it from the projector
4. Plug the new projector lamp securely into place
5. Attach the panel back onto the projector and tighten the screw

ProductSiteLaunchDate : 2024-01-02T09:28:02.458Z
SpecificUsesForProduct : Lamp
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 45111602
WarrantyDescription : 200 days warranty.
Wattage : 370 watts