Cart 2 india

Specification
Brand : Rembam
BulletPoint1 : Rembam all items are 100% New(New and Improved Technology).And will be packaged in good condition before dispatch
BulletPoint2 : Lifetime:Premium quality,high brightness,long Life replacement projector lamp,lamp lifetime approximately 2000 hours
BulletPoint3 : Install:is easy and quick for your installation to make sure your device is back in action
BulletPoint4 : Guar antee:Take strict test before delivery.Excellent return service and friendly customer service.Any other problems with the projector lamp,please contact us
BulletPoint5 : Compatible projector:for Mitsubishi SD200 Mitsubishi SD200U Mitsubishi XD200 Mitsubishi XD200U Mitsubishi SC200 Mitsubishi SC200U
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 0794471873064
ExternallyAssignedProductIdentifier2 : 794471873064
ItemName : Rembam VLT-XD200LP/60.J3004.001/AJ-LA80/LAMP3531/TLPLMT50 Projector Replacement Compatible Lamp with Housing for Mitsubishi SD200 SD200U XD200 XD200U SC200 SC200U
ItemPackageQuantity : 1
ItemShape : Bulb
ItemTypeKeyword : video-projector-lamps
Manufacturer : Rembam
NumberOfItems : 1
ProductDescription :

Rembam Information:

Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

Specifications:

Part number:VLT-XD200LP/60.J3004.001/AJ-LA80/LAMP3531/TLPLMT50

Application:Business/Education/Home/School

Compatible:for SD200 SD200U XD200 XD200U SC200 SC200U

Package:

1 bulb with housing

1 Instructions sheet

Installation:

1.Turn off the projector and unplug the power cord.

2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.

3.Loosen the lamp cover screw. Then slide the lamp cover off.

4.Loosen the two screws holding the lamp in place.

5.Hold the lamp as shown and pull it straight out.

6.Gently insert the new lamp. Then tighten its screws.

7.Replace the lamp cover, then tighten its screw.

Notes:

1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.

2.We provide excellent re fund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.

ProductSiteLaunchDate : 2020-12-11T09:10:04.516Z
UnspscCode : 45111600