SpecificationAutomotiveFitType : universal_fit
AutoPartPosition : rear
Brand : QUICKMARINE
BulletPoint1 : The transom saver and the steering cylinders stabilizer stop clips fit most outboard motors with 2 and 3 rams tilt and trim systems (Details Please Check The Description Below)
BulletPoint2 : This kit contains 1 pc outboard transom saver and 2 pcs trailering motor locks, compatible with Yama-ha Mercury Evinrude/Johnson Suzuki Tohatsu marine models (It is recommended to use 2 pcs transom savers to achieve a better force balance and maintain a longer service life)
BulletPoint3 : The transom support bar and the hydraulic steering stop locks can reduce vibration, brace and protect the outboard engine, prevent damage to the tilt/trim unit, motor steering cables, hydraulic lines and gear housing when trailering
BulletPoint4 : Compared to traditional metal transom saver, this set is easy to install, won't rust, minimizes scraping between the metal and the transom, and is safe to use in both salt and freshwater applications
BulletPoint5 : NOTE: Please check carefully if there is a grease fitting on the motor before use, if so, DO NOT use the transom support or the fitting may be broken off by it
Color : Red (1 Pipe)
CompatibilityOptions : Marine Boat Most Yama-ha Mercury Evinrude Suzuki Tohatsu Outboard with 2 & 3 Rams Trim/Tilt System
CompatibleWithVehicleType : Yamaha outboard 40 50 HP Pro50
EngineDisplacement : 246 cubic_centimeters
EngineType : 2/4 Stroke
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 683370649774
ExternallyAssignedProductIdentifier2 : 0683370649774
FuelCapacity : 24 liters
FuelType : Gasoline
IncludedComponents : Housing, insert, impeller,plate,gasket,bolts etc..
IncludedComponents1 : 1X Red Transom Saver Motor Toter Support
IncludedComponents2 : 2X Blue Outboard Steer Stop Stabilizer Clips
IsAssemblyRequired : 1
ItemName : QuickMarine 2 or 3 Rams Boat Transom Support Saver with 2 Pcs Trailering Motor Locks for Marine Outboard Engines Material Plastic and Rubber Red
ItemPackageDimensions_Height : 24.003 centimeters
ItemPackageDimensions_Length : 6.1976 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : outboard-motors
Manufacturer : QuickMarine Genuine Parts
Material : Marine Grade Reinforced Plastic Cover and CR Rubber
MaximumHorsepower : 350 horsepower
ModelName : Boat Transom Saver with Motor Locks
ModelNumber : TS001
MountingType : Transom Mount
NumberOfBoxes : 1
NumberOfItems : 1
OeManufacturer : Marine Boat Most Yama-ha Mercury Evinrude Suzuki Tohatsu Outboard with 2 & 3 Rams Trim/Tilt System
OemEquivalentPartNumber : TS001
OperationMode : Manual
PackageLevel : unit
PartNumber : TS001
ProductDescription :
Fit:
- All Mercury and all Pro XS models with 3-Ram trim/tilt systems.
- Yama-ha (plus new SHO) outboards 120-350 HP.
- Evinrude/Johnson outboards 150-300 HP, except Generation 2.
- Suzuki 4-stroke outboards DF140-DF350 HP.
- Tohatsu outboards 115-250 HP (Trim limiter may need to be adjusted).
NOTE:
- 1. It is recommended to use 2 pcs transom savers to achieve a better force balance and maintain a longer service life.
- 2. Please check carefully if there is a grease fitting on the motor before use, if so, DO NOT use the transom support or the fitting may be broken off by it.
ProductSiteLaunchDate : 2024-08-27T08:00:57.303Z
RecommendedUsesForProduct : Boat
RegulatoryComplianceCertification : RSDOS.0494GA-004
Size : 8.7" (L) x 2" (D)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : 30 days
WeightClass : Light Weight