Cart 2 india

Specification
Amperage : 20 amps
Brand : ENERLITES
BulletPoint1 : Provides a surface mounted pop-up outlet for commercial or residential locations. Ideal for use in kitchen islands, counter tops, and bathroom vanities
BulletPoint2 : Install in hardwood, tile, carpet, marble and granite flooring. Best when installed away from high traffic areas. Not for use in concrete flooring
BulletPoint3 : Features 2.1A total USB charging, durable 20A tamper-resistant receptacles, and non-corrosive hardware to ensure longer product lifespan
BulletPoint4 : Assembled dimensions: 6” diameter x 3.0” Height ( 150 x 76 cm). Includes: pop-up cover with receptacle outlet, weather gaskets, mounting screws, junction box, and installation instructions
BulletPoint5 : Complies with 2017 NEC, Article 406.12 for tamper-resistant receptacles, Friendly U.S. based support team, 1-year manufacturer’s warranty
Color : Nickel, USB
CompatibleDevices : All
ConnectivityTechnology : USB
ConnectorType : USB
ExternallyAssignedProductIdentifier1 : 883951457464
ExternallyAssignedProductIdentifier2 : 0883951457464
IncludedComponents : Floor Box Kit
ItemName : ENERLITES Round Pop-Up Floor Box Kit, 6" Diameter Cover, 20A Tamper-Resistant USB Receptacle, Watertight Gasket, Corrosive Resistant Hardware, 961501-S-USB, Nickel Plated Brass Cover
ItemPackageDimensions_Height : 17.7038 centimeters
ItemPackageDimensions_Length : 11.0998 centimeters
ItemPackageDimensions_Width : 17.6022 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electrical-outlet-boxes
Manufacturer : ENERLITES
Material : Brass
ModelNumber : 961501-S-USB
NumberOfItems : 1
PackageLevel : unit
PartNumber : 961501-S-USB
PowerPlugType : no_plug
ProductDescription : INSTALLATION STEP:
1. Prior to installation, a professional granite cutter should cut a square hole in the desired location of the receptacle, the size of the hole is 4-1/16" X 4-1/16"
2. Always use the supplied steel box, for the floor installation, secure the steel box on the bottom of the hole by the two screws provided. If you install on the countertop, it is necessary to install the tab provided to the steel box, then use the construction adhesive or glue to attach the steel box to the countertop.
3. Run wire into the 1/2" knock out the side of the box furthest away from the front of the countertop, if the knockouts are used closest to the front of the counter, the unit will not open because of interference.
Note: For the countertop installation, the steel box should be placed at the back of countertop. 4. Only use 9 or 10 gauge stranded U.L.listed wire, strip the wires and insert the stripped wire into the quick connect terminal box making sure that no striped wire is exposed, tighten the screws to secure the wires to the terminal block.
Note: Any excess wires should be pushed out of the box or made to be as flat as possible on the bottom of the steel box. Failure to push the wires out of the box or make it flat in the box will interfere with the opening mechanism and the unit will not be able to pop open.
5. Pop up the receptacle and line up the two screw holes with the thread holes in the steel box and then fasten by 2 screws provided.
6.Open and close the unit: Pulling the opening tab until the outlet completely open and close to the its lock place.
ProductSiteLaunchDate : 2019-07-09T21:58:57.458Z
SpecificationMet : NEC
Style : Round Nickel, USB
SupplierDeclaredDgHzRegulation : not_applicable
TotalPowerOutlets : 2
UnitCount : 1
UnspscCode : 39121400
Voltage : 125 volts