Cart 2 india

Specification
Brand : BoShiNuo
BulletPoint1 : Size: EU:86mm*86mm. US:118mm*72mm
BulletPoint2 : APP: Homekit/Cozylife
BulletPoint3 : Voice Control: Compatible with HomeKit, Alexa and Gogle Assistant.
BulletPoint4 : Rated Voltage: AC 100V-240V
BulletPoint5 : With capacitor, it can be installed and used without neutral wire
Color : 652-homekit-white-01
ItemName : BoShiNuo Smart Switch WiFi Homekit No Neutral US/EU Standard Touch Sensor Light Switch Wall Smart Home Siri Voice Control-652-Homekit-WHITE-01
ItemTypeKeyword : electrical-outlet-switches
Manufacturer : BoShiNuo
ModelNumber : KS-CK2-R05-433-SET
NumberOfItems : 7
PartNumber : HY1107-254
ProductDescription : Item Type:SWITCHES

Certification:RoHS,FCC,CE

Rated voltage:AC 100-240V

wifi type:2.4Ghz

3C rated voltage range:85-240V

Shell material:ABS+PC

Protective function:Overload protection

Standard type:European standard and American standard

working temperature:-10~45℃

Load Power:3-300W/gang(Note:If it is used for LED or energy saving bulb,the power load should be less than 100W)

Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n

Support by : Android and iOS

Security mechanism: WPA-PSK/WPA2-PSK

App Remote Control: Set up your Aple TV, or as a home hub, then you can control the HomeKit accessories remotely. If you don't have these devices, you can control the smart switch anytime anywhere via CozyLife app as well. and there is no distance limit. Suitable for any 2.4GHz or dual-band WiFi router. No hub is required.

Easy Setup & Group Control: It works with HomeKit,Simply use smart WiFi switch and scan the HomeKit code, integrate and set up it, No require to install others APP.

No Hub required for set up: At anytime anywhere Immediately start controlling your Switch with quick and easy set up using wifi on your compatible iOS device with the Home App.

The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and bring you a comfortable and intelligent lifestyle

Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.

ProductSiteLaunchDate : 2024-11-07T12:04:29.343Z
UnitCount : 7
UnspscCode : 39122200