Cart 2 india

Specification
Brand : XJRJ
BulletPoint1 : APP: Aple Homekit/Cozylife
BulletPoint2 : Voice Control: Compatible with Aple HomeKit, Voice Control: Through smart speakers and smart voice assistants(Echo / Dot / Dot / Tap / Assistant / Home / IFTTT)voice control is achieved
BulletPoint3 : Load Power:3-300W/gang(Note:If it is used for LED or energy saving bulb,the power load should be less than 100W)
BulletPoint4 : Wi-Fi: 2.4GHz, IEEE 802.11 b/g/n
BulletPoint5 : Power Supply: Neutral Wire and Live wire
Color : 662-homekit-black-01
ConnectivityProtocol : Wi-Fi
ConnectorType : Plug-In
ControllerType : IFTTT
ControllerType1 : Push Button
ControllerType2 : Android
ControllerType3 : iOS
ControllerType4 : Amazon Alexa
ControlMethod : voice
ControlMethod1 : touch
ControlMethod2 : remote
ControlMethod3 : application
ControlMethod4 : voice
CurrentRating : 1 amps
IncludedComponents : No
ItemName : XJRJ Smart Switch, No Neutral Wire, EU/US Standard, WiFi Touch Sensor, 1/2/3 Gang, Siri Voice Control 662-Homekit-BLACK-01
ItemPackageDimensions_Height : 10.8966 centimeters
ItemPackageDimensions_Length : 4.3942 centimeters
ItemPackageDimensions_Width : 8.001 centimeters
ItemTypeKeyword : electrical-outlet-switches
Manufacturer : XJRJ
Material : Plastic
ModelName : Locadencev0g82ysb45
ModelNumber : Locadencev0g82ysb45
MountingType : Panel Mount
NumberOfItems : 1
OperatingVoltage : 240 volts
OperationMode : Automatic
PartNumber : OW160
ProductDescription : 1.Voice Control: Compatible with Aple HomeKit, Voice Control: Through smart speakers and smart voice assistants(Echo / Dot / Dot / Tap / Assistant / Home / IFTTT)voice control is achieved
2.App Remote Control: Set up your Aple TV, or iPad as a home hub, then you can control the HomeKit accessories remotely. If you don't have these devices, you can control the smart switch anytime anywhere via CozyLife app as well. and there is no distance limit. Suitable for any 2.4GHz or dual-band WiFi router. No hub is required.
3.Easy Setup & Group Control: It works with Aple HomeKit,Simply use smart WiFi switch and scan the HomeKit code, integrate and set up it, No require to install others APP.
4.No Hub required for set up: At anytime anywhere Immediately start controlling your Switch with quick and easy set up using wifi on your compatible Aple iOS device with the Aple Home App.
5.The intelligent timer switch will automatically turn on after setting a timer for this switch, which is essential for daily scheduling, and bring you a comfortable and intelligent lifestyle

Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.
ProductSiteLaunchDate : 2024-05-23T05:54:06.962Z
SupplierDeclaredDgHzRegulation : other
SwitchType : Touch Switch
SwitchType1 : Touch Switch
SwitchType2 : Temperature Switch
UnitCount : 1
UnspscCode : 39122200