Cart 2 india

Specification
Brand : Denash
BulletPoint1 : Built-in ratchet stop device ensures accurate repetitive readings
BulletPoint2 : Clear marking line for convenient reading
BulletPoint3 : The main micrometer body is made of stainless steel with chrome plated surface, wear-resisting and
BulletPoint4 : alloy measuring heads can be used for various internal size measurement, fine workmanship and no burr
BulletPoint5 : Designed with locking device, precise machinery structure make it more intuitive and convenient to read
Color : Silver+black
ExternallyAssignedProductIdentifier : 7643260119186
IncludedComponents : No
ItemName : Bore Micrometers, Alloy Measuring Heads Bore Micrometer, Wear Resistant and for School Home
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : outside-micrometers
Manufacturer : Denash
Material : Metal
MeasurementAccuracy : 0.1mm
ModelName : Denash0xa9twm3sp
ModelNumber : Denash0xa9twm3sp
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Denash0xa9twm3sp
ProductDescription : 1. alloy measuring heads can be used for various internal size measurement, fine workmanship and no burr
2. Clear marking line for convenient reading
3. The main micrometer body is made of stainless steel with chrome plated surface, wear-resisting and
4. Designed with locking device, precise machinery structure make it more intuitive and convenient to read
5. Built-in ratchet stop device ensures accurate repetitive readings

Specification:
Features:
alloy measuring heads can be used for various internal size measurement, fine workmanship and no burr.
Clear marking line for convenient reading.
The main micrometer body is made of stainless steel with chrome plated surface, wear-resisting and .
Designed with locking device, precise machinery structure make it more intuitive and convenient to read.
Built-in ratchet stop device ensures accurate repetitive readings.
Specifications:
Type: Inside micrometer
Measuring Range: 5mm~30mm
Material: Stainless steel
: 0.01mm
Weight: 268g(approx.)
Zeroing:
Clean the surface of measuring anvil heads with a soft cloth, then rotate measuring device to make two measuring surface . If two zero lines of differential sleeve and fixed barrel do not alignment, use the following two methods to adjust.
Method I, if the error is less than 0.02mm (0.001), use ratchet stop to lock screw tightly, then use wrench to pull fixed barrel till two zero lines alignment.
Method II, if the error is greater than 0.02mm (0.001 ),
Step1, use ratchet stop to lock screw tightly, then use wrench to loosen the ratchet stop and remove differential sleeve.
Step2, re-align zero lines of fixed barrel and differential sleeve, then put ratchet stop back on. If necessary, adjust it again using method I.
Note: There is no need to calibrate micrometer during common use. Micrometer only need calibration when it
ProductSiteLaunchDate : 2024-09-13T19:11:42.546Z
Size : 25-50mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31162400