Cart 2 india

Specification
AgeGenderCategory : Refer to description
AutomotiveFitType : universal_fit
AutoPartPosition : inner
Brand : ZIMISI
BulletPoint1 : 【Material】:This car oxygen sensor socket is forged with high-strength 65 manganese steel and treated with a black oxidation process. It is sturdy, wear-resistant, rust-proof, and corrosion-resistant, can withstand the influence of extreme environments, and is not easy to deform or break.
BulletPoint2 : 【Function】:This automotive oxygen sensor sleeve is specially designed for the installation and removal of automotive oxygen sensors. It is equipped with a 3/8-inch square head and can be used with tools such as ratchet wrenches and disconnect pliers. When the oxygen sensor fails, it can be quickly replaced to help the engine maintain the best air-fuel ratio and reduce fuel consumption and emissions.
BulletPoint3 : 【Practical Design】:This oxygen sensor socket has a side opening of approximately 5/16 inches (8 mm) and can be operated without removing the wiring harness, effectively avoiding damage to the wires during removal. The overall design is compact and can also provide a larger force angle for narrow space operations.
BulletPoint4 : 【Easy to Use】:This car sensor socket has an ergonomic size, which is comfortable to hold and labor-saving to operate. The internal groove design ensures a close fit with the sensor to prevent loosening and slipping. Even if you lack experience in car maintenance, you can easily get started and complete the work quickly.
BulletPoint5 : 【Wide Application】:This universal 6-corner automotive oxygen sensor socket is suitable for almost all oxygen sensors with a 7/8-inch (22mm) hexagonal nut. It is compatible with a variety of models, such as sedans, SUVs, trucks, etc., meeting the maintenance needs of different vehicles.
Color : Black
Configuration : Refer to description
ConnectivityTechnology : refer to description
CustomerPackageType : Standard Packaging
DriveSystem : External Hex
ExternallyAssignedProductIdentifier : 6459558941756
ExternallyAssignedProductIdentifier1 : 0762715195999
ExternallyAssignedProductIdentifier2 : 762715195999
FabricType : Refer to description
FinishType : Polished
FitType : Standard
Flavor : Fig
HandOrientation : Refer to description
IncludedComponents : Refer to description
IncludedComponents1 : Comes with housing
IncludedComponents2 : Comes with housing
IncludedComponents3 : Comes with housing
IncludedComponents4 : Comes with housing
IncludedComponents5 : Comes with housing
ItemDisplayDimensions_Depth : 1.5 inches
ItemDisplayDimensions_Diameter : 4.53 inches
ItemDisplayDimensions_Height : 1.5 inches
ItemDisplayDimensions_Length : 4.53 inches
ItemDisplayDimensions_Width : 3.31 inches
ItemDisplayWeight : 0.48 pounds
ItemLength : 3.46 inches
ItemName : ZIMISI Car Oxygen Sensor Socket, 3/8 Inch Drive ×7/8 Inch (22mm) with 5/16" Opening, 6-Point O2 Sensor Wrench with Side Wire Cutout, Universal Vehicle Sensors Installation & Removal Tool (Big)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 3.5 inches
ItemPackageDimensions_Width : 1.3 inches
ItemPackageQuantity : 1
ItemShape : Refer to description
ItemTypeKeyword : automotive-oxygen-sensor-remover-tools
Manufacturer : ZIMISI
Material : 65 Manganese Steel
MatteStyle : Refer to description
ModelName : Car Oxygen Sensor Socket
ModelNumber : Car Oxygen Sensor Socket
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ZIMISI-ZMS-174
Pattern : Refer to description
ProductDescription :

This car oxygen sensor sleeve is made of high-quality manganese steel. The overall structure is sturdy and can help you quickly install and remove the car oxygen sensor.

SPECIFICATION:

Brand: ZIMISI

Name: Car Oxygen Sensor Socket

Color: Black

Material: 65 Manganese Steel

SIZE: 3.46×1.26 inch

Applicable: Most vehicles

FEATURES:

-This oxygen sensor socket is ergonomically designed, comfortable to hold, easy to operate, and does not easily fatigue hands after long-term use.

-This car sensor socket is very simple and convenient to use, and can quickly complete the replacement of oxygen sensors, saving maintenance time.

-This car oxygen sensor socket has high hardness. It is not easy to deform or break after long-term use, and it can be repeatedly disassembled and assembled.

ProductSiteLaunchDate : 2025-04-28T03:34:13.629Z
Scent : Refer to description
Size : Big
Style : Unisex
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
VolumeCapacityName : 367.08 cubic_centimeters
WarrantyDescription : Refer to description