Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : VANZACK
BulletPoint1 : Paddle Board Pump Adapter is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to off the pressure
BulletPoint2 : Air Valve Adapter or compressor and inflate to the recommended PSI
BulletPoint3 : Air Pump Converter with the in the closed position, insert the Schrader fitting and rotate to lock in place. Remove the on the fitting, and connect a standard electric pump
BulletPoint4 : SUP Pump Adaptor Standard Schrader utilizes a standard Schrader fitting to couple with an air compressor or bike/tire pump
BulletPoint5 : Conventional Air Pump Adapter is suitable for most high-pressure air valve equipment such as paddle board, rubber boat, dinghy, and so on; With it, you dont need to buy a special rubber boat pump
BulletPoint6 : 6、The Surf adapter has a built in limiter that stops the rotation at 35 degrees, which prevents your wheels from getting too close to your deck.
Color : black
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 0797659212341
ExternallyAssignedProductIdentifier2 : 797659212341
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : 1 Set Surf and Rail Adapter Surfskate Trucks
ItemDisplayDimensions_Height : 3.04 centimeters
ItemDisplayDimensions_Length : 1.33 centimeters
ItemDisplayDimensions_Width : 1.33 centimeters
ItemDisplayWeight : 0.08 pounds
ItemName : VANZACK Inflatable SUP Pump Adaptor Air Pump Converter, Air Valve Adapter Boat Air Pump Adapter Pumping Head Connector for Boat, Paddleboard and Kayak
ItemPackageDimensions_Height : 3.5 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : standup-paddleboard-accessories
Manufacturer : VANZACK
Material : Rubber
ModelName : 02
ModelNumber : 126OB51K19J
NumberOfItems : 1
PartNumber : 126OB51K19J
Pattern : Solid
PowerSourceType : Corded Electric
ProductDescription : Description

- Material: Rubber & copper.
- Size: 3.4 x 3.4 x 7.8 cm.
- Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board.

Package Including

1/2 x Air Pump Adapter
ProductSiteLaunchDate : 2023-05-22T13:29:00.486Z
Size : 1 piece
Style : Centimeter
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudience : Adult-Unisex
UnspscCode : 40141600
WarrantyDescription : Nuevo