Cart 2 india

Specification
Brand : ChgImposs
BulletPoint : For RC bodies
BulletPoint1 : Capacity and Pressure:suction cup capacity of 33 (fl oz), the maximum pressure that the bed liner spray gun can withstand is 120 psi, and it is recommended to use it within the pressure range of 56-100 psi; it comes with a 1/4-inch quick-connect air inlet for simple installation and operation
BulletPoint2 : Air Tight:Automotive paint gun Using the whole die-casting moulding process, spray gun one-piece moulding, air flow is smooth, good airtightness without air leakage
BulletPoint3 : Comfortable Experience:Undercoating gun use of threaded button cans, the operation of the assembly and disassembly is simple, airtight, do not have to worry about paint leakage due to tilt
BulletPoint4 : Easy Operation:Fluid film gun Ergonomically designed to fit your palm grip, the lever is sensitive and controls air flow through the lever grip, Plug in the quick release female connector and work
BulletPoint5 : Wide Application:Whether you are a professional in the automotive industry or a DIY enthusiast, these air paint spray guns are designed to meet a wide range of coating activities; these primer spray guns are designed for automotive rust prevention, rubber primer, anti-chip paint, truck bed coating and other purpose coatings
Color : Silver
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier1 : 0659475079143
ExternallyAssignedProductIdentifier2 : 659475079143
IncludedComponents : automotive-door-lock-switches
IncludedComponents1 : Spray Gun
IncludedComponents2 : Suction Feed Cup
ItemName : ChgImposs Undercoating Spray Gun with Suction Feed Cup for Truck Bed Liner Coating, Rubberized Undercoat, Woodworking Undercoat, Rust Proofing Paint Spray Gun
ItemPackageDimensions_Height : 4.2 inches
ItemPackageDimensions_Length : 13.9 inches
ItemPackageDimensions_Width : 8.3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : auto-body-spray-guns
Manufacturer : FLXDirect
ManufacturerMinimumAge : 192
Material : Aluminum Alloy
Material1 : Plastic
Material2 : Metal
MaximumPressure : 120 pounds_per_square_inch
ModelName : Undercoating Spray Gun
ModelNumber : U6_POW_A1B
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : POW_A1B
PowerSourceType : Air Powered
ProductDescription :

Interface: 7.5mm

Working Pressure: 3 - 6MPa

Nozzle size: 6.0mm

Type: Mini Spray Gun

Pressure Feeding Method: Pressure

Material: Aluminum Alloy

Color: Silver

Features:
- Flexible and easy to use.
- Aluminum alloy material is not easy to corrosion.
- Easy to operate, 6mm nozzle diameter.
- The spray distance of 2m is very good.
- Compact and easy to carry.
- The scope of application is applicable to various repairs such as car furniture, factory facilities, etc.

Model: TL-GD-4

Paint Discharge Amount: 70 (ml/s)

Paint Supply Method: Suction Type

Use:
- Before using the spray for the first time, firstly add the remain in the paint channel to the release of the gun, and try to filter the inside of the spray gun to ensure clean.
- Control the angle and distance between the spray gun and the spray gun during spraying.
- Control the proper spray pressure during spraying.
- After pulling the trigger before spraying, the first gear can be used for dust blowing.
- The second stop flows through the nozzle and the air and atomize at the same time.
- According to the need to use the amount of paint, adjust the seasoning screw to control the needle process, freely adjust the paint measurement flow.
- Adjust the measurement and width of the spray coating to achieve a complete spray effect.
- After use, clean the airflow in time, nozzle (first to the paint inside the gun, then add the thinner and shake the trigger while pulling, try to let the residual paint inside the spray gun spray.
- Then remove the airflow and clean it. If the airflow is too dirty, you need to soak the thinner for a while before cleaning.
- Do not damage the hole in the airflow during cleaning. After removing the airflow, protect the nozzle. Do not let the nozzle hurt. If the cleaning is not clean, it will affect the atomization effect.

Note:
- Choose clean compressed air.
- Choose the right spray equipment for your workplace.
- Before connecting the air pipe, make sure that the spray gun is complete and firm.
- It is strictly forbidden to point the gun to yourself or others to avoid injury caused by misuse.
- Wear knee protection equipment when working. (there will be paint fog when spraying)

Product Weight : 295 G / 10.41 Ounces

Product Dimensions (L*W*H) : 35.0*20.7*10.3 CM / 13.78*8.15*4.06 Inches

Retail Packaging: Carton Packaging

ProductSiteLaunchDate : 2024-11-04T11:06:22.531Z
RecommendedUsesForProduct : Painting
SafetyWarning : It is strictly forbidden to point the gun to yourself or others to avoid injury caused by misuse. Wear knee protection equipment when working. (there will be paint fog when spraying). Choose clean compressed air. Choose the right spray equipment for your workplace. Before connecting the air pipe, make sure that the spray gun is complete and firm.
Size : 1 count (pack of 1)
Style : Gun
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Unisex Adult
UnitCount : 1
UnspscCode : 31211900
WarrantyDescription : 12 Months