Cart 2 india
In2Cart
Rs. 0
Product Information
Specification
AgeRangeDescription : All Age Groups
Brand : Sublimation Blanks Company
BulletPoint1 : Great for Sublimation and Laser engraving
BulletPoint2 : PU Faux Leather
BulletPoint3 : Pebbled Textured Finish
BulletPoint4 : 4" x 2" rectangle size with rounded corners
BulletPoint5 : Diamond Shape
BulletPoint6 : Blank! You add your own artwork!
BulletPoint7 : You get 10 pieces!
BulletPoint8 : [NOT COMPATIBLE WITH HIPPO or COSMOS BRAND SUBLIMATION INK DUE TO THEIR CHEMICAL MAKEUP!]
Capacity : 16 ounces
CareInstructions : Machine Wash
CareInstructions1 : Machine Wash
CareInstructions2 : Hand Wash Only
Color : Tan
ExternallyAssignedProductIdentifier : 6031811310303
ExternallyAssignedProductIdentifier1 : 655471014096
ExternallyAssignedProductIdentifier2 : 0655471014096
FillMaterial1 : Cotton
FillMaterial2 : Polyester
FinishType : Glossy
IncludedComponents : Lid
ItemName : 10 pcs. Blank PU Leather Diamond Shape Hat Patch! Sublimation and Laser Ready!
ItemPackageDimensions_Height : 23.6 centimeters
ItemPackageDimensions_Length : 16.7 centimeters
ItemPackageDimensions_Width : 17.1 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : heat-press-parts-and-accessories
Manufacturer : Sublimation Blanks Company
Material : Faux Leather
ModelName : Rectabgle with Rounded Corners Hat Patch
ModelNumber : RectTanPUPatch
MountingType : Sewing
NumberOfItems : 10
NumberOfPieces : 10
OccasionType : Beach
PartNumber : PUDiamTan
Pattern : Solid
PatternType : Solid
ProductDescription : [NOT COMPATIBLE WITH HIPPO or COSMOS BRAND SUBLIMATION INK DUE TO THEIR CHEMICAL MAKEUP!]
For best outcome, use old school black ink or very dark colors for a total retro look! Can also be lasered!
Our 4" x 2" Tan Faux Leather diamonmd shape hat patch sublimation blanks features an embedded black stitching look all around. They also have a aged textured appearance for that legit leather look is a great that add some retro style to any hat or jacket. Ours have glue on the back side which heats up for you to attach to your hat or garment. Neat! Our PU leather hat patches are sublimation ready and also laserable!
Perfect for hats, jackets, backpacks and other garments.
Sublimation Instructions:
Temperature: 370-380 degrees for 45-50 seconds [These times/temps are what work for us. Every heat press is different, so you will need to test for the time/temp that works for your situation.]
These patches feature our newest glue back technology where it has a removeable wax paper on the back. You sublimate them by leaving this backer wax paper on (if missing, just use a piece of wax paper behind your patch). You then remove it to adhere to your hat or garment.
- Wipe your patch free of lint
- You sublimate on the front grey side of the patch! The shiny side is the glue.
- Place your artwork on top of your patch facing downwards. Use heat tape to tape your patch down onto your artwork. (Do not use adhesive spray).
- Cover everything with butcher blow-out paper
- Heat at 370-380 degrees for 45-50 seconds. You DO NOT need heavy pressure for these. Don't squash them down hard.
- Use heat gloves to remove your artwork immediately when done pressing, but leave the wax paper on the back of your patch on. Let it cool for 15+ minutes so your glue sets up again. Peel the wax paper back.
- To attach your patch to your hat or garment, remove the wax paper from behind. Pre-press your garment to warm it up about 10 seconds. Now, place your patch with the glue side down on your hat and use a hat press at 300 degrees for 35-45 seconds. You can also use an iron at its hottest setting with no steam, too. But be sure to cover your patch with paper first.
If your patch does not adhere with an iron, you can also use fabric glue for added stick.
ProductSiteLaunchDate : 2022-10-12T00:00:09.902Z
RecommendedUsesForProduct : Home
Reusability : Reusable
Size : 9x7
Style : Retro
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Personalized
UnitCount : 4
UnspscCode : 60120000
