Cart 2 india

Specification
Brand : DMM
BulletPoint1 : Claimed Weight: (1) 0.5 oz, (2-5) 1 oz, (6-7) 1.5 oz, (8) 1.6 oz, (9-10) 1.9 oz, (11) 2.5 oz
BulletPoint2 : Strength: [ 1] 7 kN, [ 2] 9 kN, [ 3] 11 kN, [ 4] 12 kN, [ 5] 12 kN, [ 6] 12 kN, [ 7] 12 kN, [ 8] 12 kN, [ 9] 12 kN, [ 10] 12 kN, [ 11] 12 kN
BulletPoint3 : Material: [heads] 100% aluminum, [cable] 100% steel
BulletPoint4 : Manufacturer Warranty: 1 year
Color : #9
Department : unisex
DriveSystem : External Hex
ExternallyAssignedProductIdentifier : 5031290191876
ExternallyAssignedProductIdentifier1 : 602150411318
ExternallyAssignedProductIdentifier2 : 0602150411318
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 1 inches
ItemDisplayWeight : 0.05 pounds
ItemName : DMM Wallnut - Gold - 9
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 11.176 centimeters
ItemPackageDimensions_Width : 20.32 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : climbing-chocks
Manufacturer : DMM
Material : [heads] 100% aluminum| [cable] 100% steel
MetalType : Aluminum
ModelNumber : A1619A
PartNumber : A1611-21A
ProductDescription : Despite their simple appearance, Wallnuts are highly featured pieces of climbing hardware. A different alloy is used for each size - smaller Wallnuts are made from a harder alloy to prevent shearing, while larger sizes are softer so they can bite into placements. Larger Wallnuts feature hollow construction to reduce weight.Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them.Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness.Wallnuts are the basis on which to build a comprehensive climbing rack. Complemented by other, more specialised pieces of protection, they are guaranteed to be the most regularly used piece of protection on your harness. Specs Complex 3D curves and scallops means secure and fast placement DDM's accurate heat treatment processes on specifically chosen alloys maximizes bite DMM counter sinks all the drilled radiuses in order to avoid stress points where the wire enters the nut The nuts are all well rumbled to remove sharp edges that can hinder placement Hot forged from sizes 1 to 6 keeps strength high and weight to a minimum Extruded bar used on sizes 7 to 11 to reduce weight The wire used is chosen so that the nut can be placed at full reach without them flooping around Full size crimp for safety The label is on upside down so you can confirm the size more easily when the units are hanging on your harness Joint collaboration with Wild Country to standardize color recognition Size Weight
ProductSiteLaunchDate : 2009-08-20T09:00:29.000-00:00
Size : One Color
SpecialSizeType : #4
TargetAudience : Unisex
UnspscCode : 31161700