Specification Brand : Lowell BulletPoint : Optimize any installation with the industry-leading power capacity of the fixed voltage, DC Power BulletPoint1 : Power Rating: 120VAC 60Hz, 20A BulletPoint2 : Outlets: 9 (15A) outlets—1 front (un-switched), 2 rear (un-switched), 6 rear (switched) BulletPoint3 : Actuation Switch: Front panel rocker switch with momentary contacts (normally open SPST) plus rear barrier strip termination blocks for momentary (normally open) remote switches BulletPoint4 : 4-step sequencer has a delay between steps that can be set between 0.5 and 10 seconds (screwdriver adjustable) BulletPoint5 : Rear termination blocks accommodate remote switches, external triggers and an alarm system interface for use where mandated by fire code BulletPoint6 : 2 dry contact closures (steps 5 and 6) trigger remote power control units (order separately) Color : BLACK ConnectorType : Screw ExternallyAssignedProductIdentifier : 7031122536668 ExternallyAssignedProductIdentifier1 : 0811859031639 ExternallyAssignedProductIdentifier2 : 811859031639 ExternallyAssignedProductIdentifier3 : 00656747346491 ItemName : Lowell ACSPR-SEQ6-2009 PDU with 9 (15A) Outlets, 20A Rating, Advanced Multi-Stage Surge Suppression, Sequencer, Remote Circuitry; 120VAC, 60Hz, 20A; 4-Step Sequencer; 2-Dry Contact Closures ItemPackageDimensions_Height : 2 inches ItemPackageDimensions_Length : 7 inches ItemPackageDimensions_Width : 19 inches ItemPackageQuantity : 1 ItemTypeKeyword : power-distribution-units Manufacturer : Lowell Material : Other ModelNumber : ACSPR-SEQ6-2009 MountingType : PCB Mount NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : ACSPR-SEQ6-2009 ProductDescription : Lowell ACSPR-SEQ6-2009 PDU with 9 (15A) Outlets, 20A Rating, Advanced Multi-Stage Surge Suppression, Sequencer, Remote Circuitry; 120VAC, 60Hz, 20A; 4-Step Sequencer; 2-Dry Contact Closures
The ACSPR Series with 9 outlets (1 front, 8 rear) features Advanced Multi-Stage Surge Protection with TCR (Triple Clamping Redundant) technology to protect electronics against power surges and spikes up to 72,000A when operating at full capacity. LED status indicators serve to alert users if the unit is compromised and in need of repair/replacement
Key Features: - Power Rating: 120VAC 60Hz, 20A - Outlets: 9 (15A) outlets—1 front (un-switched), 2 rear (un-switched), 6 rear (switched) - Actuation Switch: Front panel rocker switch with momentary contacts (normally open SPST) plus rear barrier strip termination blocks for momentary (normally open) remote switches - 4-step sequencer has a delay between steps that can be set between 0.5 and 10 seconds (screwdriver adjustable) - Rear termination blocks accommodate remote switches, external triggers and an alarm system interface for use where mandated by fire code - 2 dry contact closures (steps 5 and 6) trigger remote power control units (order separately) - Color coded LED status indicators - Advanced surge protection to 72,000A - Termination: 9 ft. attached cord with NEMA 5-20P plug
Specifications: - Power Rating: 20A - Front Outlets: 1(15A) - Rear Outlets: 8(15A) - Panel Switch: rocker - Total Outlets Controlled by Switch: 6 - Time Delay: SEQ - Advanced Surge Suppression: TCR - Input from Remote Switch: yes - Input from Alarm System: yes - Output to Remote Control: yes - Power Input: 9 ft cord - Chassis Dimensions: 19 W x 9 D x 1.75 H inches - Shipping Weight: 11.0 lbs ProductSiteLaunchDate : 2018-12-17T00:00:00.000-08:00 StreetDate : 2020-01-08T00:00:01Z SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 UnspscCode : 39121000 Voltage : 12 volts WarrantyDescription : Limited Warranty Wattage : 300 watts