Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Foredom
BulletPoint1 : Heavy guage steel frames
BulletPoint2 : Ball bearings
BulletPoint3 : Base is seam welded to frame
BulletPoint4 : Snap Action starting switch for reliability
BulletPoint5 : 【Features】--- The motor adopts pure copper wire coil, which has the characteristics of low heat and low loss.
Color : 12v
ExternallyAssignedProductIdentifier : 7861206262295
ExternallyAssignedProductIdentifier1 : 781568100042
ExternallyAssignedProductIdentifier2 : 0781568100042
ExternallyAssignedProductIdentifier3 : 00781568100042
Horsepower : 120 watts
ItemName : Motor Brush Pair for BL, BL-1, BL-1A & BL-2 Bench Lathe Series Permanent Magnet Motors
ItemPackageDimensions_Height : 24.384 centimeters
ItemPackageDimensions_Length : 34.29 centimeters
ItemPackageDimensions_Width : 28.448 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : permanent-magnet-motors
Manufacturer : Foredom
Material : Steel
Material1 : Plastic
Material2 : Metal
Material3 : Graphite
Material4 : Copper
ModelName : l3354
ModelNumber : L3354
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : MP262P
ProductDescription : Foredom MP262P Motor Brush pair. Pair of motor brushes for Bench Lathes M.BL, M.BL-2CE, BL-1, BL-1A, and BL-2A (115 volt and 230 volt). Brushes should be checked for wear periodically. When new they are approximately 1/2" long. Replace them when they have worn to 1/4". Be sure to replace both motor brushes even if one of them is less worn than the other. More Details About Motor Brushes:All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is imbedded in the brush, terminated in a "U" or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.Click to View Video Material on Changing Motor Brushes:
ProductSiteLaunchDate : 2014-11-10T07:08:25.496Z
Size : 1200
Speed : 3450 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 47131600
Voltage : 230 volts