Cart 2 india

Specification
Brand : Automation Technology Inc.
BulletPoint : NEMA34 Stepper Motor
BulletPoint1 : Up to 35 Nm lifting capability.
BulletPoint2 : Uses line voltage (120VAC).
BulletPoint3 : Speed range between 20-38 rpm.
BulletPoint4 : Low rated current draw between .95-2.1A.
BulletPoint5 : Crown, Drive, Mounting plate, etc, Sold separately
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0680051983783
ExternallyAssignedProductIdentifier2 : 680051983783
Horsepower : 2 horsepower
ItemName : NEMA34 Stepper Motor – 906 oz in 6.1A Dual Shaft (KL34H295-43-8B)
ItemPackageDimensions_Height : 11.38 inches
ItemPackageDimensions_Length : 16.5 inches
ItemPackageDimensions_Width : 11.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : permanent-magnet-motors
Manufacturer : Automation Technology Inc.
Material : Copper
NumberOfItems : 1
PartNumber : KL34H295-43-8B
ProductDescription : This very large and powerful NEMA34 stepper motor can move a lot of weight at 906 oz/in and 6.1 amps current draw per phase. 8 wire bi-polar or unipolar operation; with 1/2" Dual Shafts. NEMA34 HIGH TORQUE STEPPER MOTOR 906 oz-in KL34H295-43-8B (1/2" Dual Shaft) Specification: 906 oz In. Hybrid Motor 1.8° /200 Steps Per Rev. 6.1 Amps Current Per Phase ( Bipolar Parallel) 8-wire Bi-polar or uni polar, NEMA 34 Frame
ProductSiteLaunchDate : 2017-08-28T07:00:00.000Z
Speed : 1725 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26101200
Voltage : 120 volts