Cart 2 india

Specification
Brand : Omron
BulletPoint : This item is used and in working condition.
BulletPoint1 : WORKING PROCESS:The photoelectric switch converts the input current into a light on the transmitter, and the receiver detects the target object according to the or of the received light.
BulletPoint2 : WORKING PRINCIPLE:Photoelectric switch makes use of the block or reflection of the detected object to the light beam, and the circuit is turned on by the synchronous circuit to detect the or absence of the object.
BulletPoint3 : WIDE RANGE OF USES:The detection objects of this photoelectric are not limited to metal, and all objects that reflect light (or block light) can be detected.
BulletPoint4 : HIGH SENSITIVITY:The sensor uses infrared light to detect the objects for sensitive detection with delay that can be almost ignored.
BulletPoint5 : SAFETY DESIGN:The photoelectric switch converts has built-in multiple circuits to ensure use.
ConnectorType : Screw
CurrentRating : 0.06 milliamps
ExternallyAssignedProductIdentifier1 : 739551845562
ExternallyAssignedProductIdentifier2 : 0739551845562
ExternallyAssignedProductIdentifier3 : 00785901317067
FinishType : Finish
IncludedComponents : inc
ItemName : OMRON E3Z-LS66 Distance-settable Photoelectric Sensor M8 Connector Models,NPN NN
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-photoelectric-sensors
Manufacturer : OMRON
Material : paper
ModelNumber : e3z-ls66
MountingType : Tabletop
NumberOfItems : 1
PartNumber : E3Z-LS66
PowerSourceType : PowerSource
ProductDescription : [Shape] Square type
[Sensing method] Distance-setting
[Sensing distance] 20 mm to 200 mm
[Setting range] 40 to 200 mm (White paper 100 x 100 mm)
40 to 160 mm (Black paper 100 x 100 mm)
[Detection range] BGS: 20 mm to Setting distance (White paper, Black paper 100 x 100 mm)
FGS: Setting distance to 200 mm min. (White paper 100 x 100 mm); Setting distance to 160 mm min. (Black paper 100 x 100 mm)
[Differential distance] 10% max. of setting distance
[Reflectivity characteristic (black-white error)] 10% max. of setting distance
[Light source] Red LED (Emission wave length: 680 nm)
[Power supply voltage] 12 to 24 VDC +/-10% (ripple (p-p) 10% max.)
[Current consumption] 30 mA max.
[Control output] NPN open collector output
26.4 VDC max.
Load current: 100 mA max.
Residual voltage: 1 V max.
[Operation mode] Light-ON/Dark-ON selectable
[Protective circuit] Output short-circuit protection
Power supply reverse polarity protection
Mutual interference prevention
[Response time] 1 ms max. (Operate or reset)
[Sensitivity setting] 5-turn endless adjustment
[Ambient illuminance] Incandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
[Insulation resistance] 20 M Ohm min. at 500 VDC
[Dielectric strength] 1000 VAC at 50/60 Hz for 1 min
[Vibration resistance] 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
[Shock resistance] 500 m/s**2 for 3 times each in X, Y, and Z directions
[Degree of protection] IEC: IP67
[Connection method] M8 connector models
[Indicator] Operation indicator (orange), Stability indicator (green)
[Weight (packed state)] Approx. 20 g
[Material] Case: PBT
Lens: Denatured Polyarylate
[Accessories] Instruction manual


1
ProductSiteLaunchDate : 2017-09-06T07:10:00.160Z
SpecificationMet : World Health Organization Uv Index Classification Standards
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UpperTemperatureRating : 85 degrees_celsius
Voltage : 5 volts