Cart 2 india

Specification
Brand : Banworks
BulletPoint1 : Compatibility: Designed with screw holes that are compatible with American-made guitars. Occasionally, some holes might need to be redrilled for a perfect fit. For Asian-made guitars, the hole positions differ slightly, and sometimes additional drilling may be required for a proper fit. There is a large amount of EM shielding aluminum sticker on the pickguard back to insulate the electronics on it.
BulletPoint2 : SSS Neck/Middle/Bridge Pickups: Magnet: Alnico 5. Bobbin Material: Plastic plate. Pole Spacing: 50mm/50mm/52mm. Resistance (Ohms): 5.6K/5.6K/6.8K Ω; Inductance (Henries): 2.2H/2.2H/3.0H. Vintage-style tones is similar with F '60s Strat pickups, staggered pole pieces for balanced output, reverse wound and reverse polarity (RWRP) Middle pickup can reduce electromagnetic interference and improve the signal-to-noise ratio of the pickup. It maintains consistency and balance in tone, especially when switching pickups, resulting in smoother and more natural tonal transitions.
BulletPoint3 : Resistance Tolerance: The resistance values can fluctuate due to changes in temperature and humidity, typically increasing in hot and dry weather and decreasing in cold and humid conditions. In extreme situations, the tolerance range for the resistance may become larger, with the marked DC resistance varying by up to ±500Ω due to environmental temperature differences.
BulletPoint4 : Electronics: Includes 5-way pickup selector switch; 2T1V control knobs, large potentiometers: two A250k potentiometers for tone, B250k potentiometer for volume with aluminium shaft; 223J (0.022uf) 400v orange capacitor. PVC wires.
BulletPoint5 : Protective Film: Covered with two layers of plastic protective film to prevent scratches or damage during shipping and handling. Please peel off the plastic protective film before use.
BulletPoint6 : Please Note: Ensure an ideal match by referring to the detailed product specifications in the images section prior to making your purchase. Please note that the screw holes on the guard plate may exhibit a minor deviation from those on your original part, as even Fender and its associated brands have changed hole locations through the years.
Color : 4Ply Red Tortoiseshell
ExternallyAssignedProductIdentifier1 : 0760518996737
ExternallyAssignedProductIdentifier2 : 760518996737
GpsrSafetyAttestation : 1
GuitarBridgeSystem : Tremolo
GuitarPickupConfiguration : S
HandOrientation : Right
ItemName : Banworks 4Ply Loaded SSS Pickguard Vintage F '60s Tones Prewired Strat Pickguard with Staggered Alnico 5 SSS Single Coil Pickups for Fender Stratocaster Electric Guitars JT/HBZC-01 Red Tortoiseshell
ItemPackageDimensions_Height : 0.08 inches
ItemPackageDimensions_Length : 11.14 inches
ItemPackageDimensions_Width : 8.78 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electric-guitar-pickups-and-pickup-covers
Manufacturer : Banworks
Material : Plastic
ModelName : JT-HBZC-01
ModelNumber : JT-HBZC-01
NumberOfBoxes : 1
NumberOfStrings : 6
PackageLevel : unit
PartNumber : JT-HBZC-01
ProductDescription : Compatibility: Designed with screw holes that are compatible with American-made guitars. Occasionally, some holes might need to be redrilled for a perfect fit. For Asian-made guitars, the hole positions differ slightly, and sometimes additional drilling may be required for a proper fit. There is a large amount of EM shielding aluminum sticker on the pickguard back to insulate the electronics on it.
ProductSiteLaunchDate : 2024-12-23T08:29:42.873Z
StringNutWidth : 1.65 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 60131500
WarrantyDescription : We offer a 30-day quality assurance plan for each product, covering defects in materials or workmanship under normal use. If any issues arise, our support team is ready to assist you promptly.