Cart 2 india

Specification
Brand : StewMac
BulletPoint : Single-coil Jazz Bass Pickup Set with Aged Components
BulletPoint1 : Built With The Same Specs That Powered Your Favorite Basses—now With The Reliability Needed By Today's Players
BulletPoint2 : Replace Those Muddy And Dark Stock Pickups! When You Need To Hold Down The Song With Deep Bass And Classic Mid-range Tone, These Are The Pickups To Choose
BulletPoint3 : The Alnico 5 Magnets Produce A Clear Tone With More Pronounced Highs And A Tighter Low End, Perfect For Bass Frequencies
BulletPoint4 : Reverse Wound For Noise Canceling
BulletPoint5 : Note: Jazz Bass Pickup Dimensions Have Varied Slightly Over The Years. Please Measure Your Pickup Cavities Before Replacing Older Pickups.
BulletPoint6 : Note: There is a slight difference in the hole spacing between the bridge pickup cover and the neck pickup cover. Please measure the pole piece spacing of your pickup before placing an order to ensure a perfect fit
Color : Chrome
ExternallyAssignedProductIdentifier1 : 0840014750412
ExternallyAssignedProductIdentifier2 : 840014750412
ExternallyAssignedProductIdentifier3 : 00663334192133
FinishType : spray paint
GpsrSafetyAttestation : 1
ItemName : StewMac Standard Jazz Bass Pickup pickup, Bridge, Black Cover
ItemPackageDimensions_Height : 3.5 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 10.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : bass-guitar-pickups-and-pickup-covers
Manufacturer : StewMac
Material : plastic
ModelName : StewMac Standard Jazz Bass Pickup pickup, Bridge, Black Cover
ModelNumber : 101679
NumberOfBoxes : 1
PackageLevel : unit
PartNumber : 101679
ProductDescription :

StewMac Pickups for Jazz Bass

Built with the same specs that powered your favorite basses—now with the reliability needed by today's players.

Replace those muddy and dark stock pickups! The Alnico 5 magnets produce a clear tone with more pronounced highs and a tighter low end, perfect for bass frequencies.

Use them as a set - When using the neck and bridge as a set, the reverse-wound, reverse-polarity coils are hum-cancelling when both pickups are at full volume.

Neck position specs

• Medium output single-coil pickup
• Polepiece spread: 2.187" (55.5mm)
• Poly-coated Formvar 42 AWG coil wire
• Potted to suppress noise
• Reverse wound for noise canceling
• Alnico 5 magnets, south polarity
• Push-back cloth-insulated lead wires

Bridge position specifications

• Medium output single-coil pickup
• Polepiece spread: 2.312" (58.7mm)
• Poly-coated Formvar 42 AWG coil wire
• Potted to suppress noise
• Alnico 5 magnets, north polarity
• Push-back cloth-insulated lead wires

Output

• Neck position: 5K ohm range
• Bridge position: 5.13K ohm range

Neck position dimensions

• Length: 3.562" (90.4mm)
• Width: 0.70" (18mm) not including mounting tabs
• Mounting screw spacing: 0.938" (23.8mm)
• Height: 0.750" (19mm)

Bridge position dimensions

• Length: 3.687" (93.6mm)
• Width: 0.70" (18mm) not including mounting tabs
• Mounting screw spacing: 0.938" (23.8mm)
• Height: 0.750" (19mm)

Compressible foam pad for height adjustment, mounting screws, and wiring diagrams are included.

Note: Jazz Bass pickup dimensions have varied slightly over the years. Please measure your pickup cavities.

ProductSiteLaunchDate : 2023-11-02T18:56:02.502Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 60131500
WarrantyDescription : Limited lifetime.