Cart 2 india

Specification
Brand : Summit Collars & Industrial Supply
BulletPoint : Inner Diameter: 1/2" Overall Height: 2-1/4" Overall Length: 4-7/8" Bolt Hole to Bolt Hole: 3-5/8" Base to Center: 1-3/16" Housing Material: Cast Iron Insert Material: Chrome Steel SAE-52100 Lubrication: Chevron SRI-2 Grease Static Load: 1,495 lbf Dynamic Load: 2,882 lbf Speed Limit: 8,800 RPM
BulletPoint1 : small friction, fast speed, smooth, low noise.
BulletPoint10 : Torque Capacity: 10MM; Surface Roughness: Ra 0.05; Material: 52100 Chrome Steel
BulletPoint2 : Precise and versatile, performing well in noise and vibration detection.
BulletPoint3 : Pre-lubricated with grease, less friction, no maintenance needed.
BulletPoint4 : Ultra-, high-quality bearings are designed to survive the roughest conditions, lowering maintenance costs and replacement frequency.
BulletPoint5 : Widely used in household appliances, garden machinery, outdoor vehicles, industrial production, etc.
BulletPoint6 : Bearings
BulletPoint7 : Item Number:KFL000; Quantitys: 1 Lot = 10 pieces
BulletPoint8 : Shaft (d):10 mm; Bolt Size (mm):M6; Weight (g):70g
BulletPoint9 : Housing Material:Zinc Alloy; Bearing Material:52100 Chrome Steel
Color : One Color
ExternallyAssignedProductIdentifier : 00850065315201
IncludedComponents : 4 PILLOW BLOCK BEARINGS
ItemName : Summit Collars, UCP201-08 1/2" Bore Pillow Block Unit Bearing/4PK
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pillow-block-bearings
Manufacturer : Summit Collars
Material : Cast Iron
ModelNumber : KOKYLEZN
NumberOfItems : 4
PartNumber : UCP201-8/4PK
ProductDescription : This unit is a standard duty pillow block bearing with a wide inner ring, a standard base to center height and a 45˚ degree grease fitting allowing for re-lubrication of the insert bearing. UCP201-08 Pillow Block Bearing is equipped with two set screws, that are positioned on the extended inner ring of the insert ball bearing, to lock and attach to the shaft. Our Mounted Block Bearing Units have been pre-lubricated with Grease, allowing them to be ready for use upon arrival.
ProductSiteLaunchDate : 2024-06-20T20:14:55.837Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1