Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Model: UCF209-28 Bearings are designed to accommodate a shaft diameter of 1 3/4 inch. Come with 4pcs screws and 2pcs key wrench.
BulletPoint2 : Material: Chrome steel sealed bearing and solid cast iron housing, providing durability and resistance to corrosion.
BulletPoint3 : Bearing Type: The pillow block bearing uses a standard ball bearing insert, which allows for high radial loads and moderate axial loads. Self-aligning, capable of compensating for misalignment between the shaft and the housing.
BulletPoint4 : Usage: Commonly used in machinery and equipment, particularly in the agricultural and industrial sectors. It is designed to support rotating shafts and provide stability and smooth operation
BulletPoint5 : Lubrication: The bearing is pre-lubricated with grease and ready for immediate installation. The appropriate lubricating oil can be added through a grease nipple after using for some time.
Color : Dark Green
ItemName : uxcell 2pcs UCF209-28 Pillow Block Bearings 1 3/4 inch Bore Self Alignment, Solid Cast Iron Base Square Flange Mounted Chrome Steel Bearings
ItemPackageDimensions_Height : 5.59 inches
ItemPackageDimensions_Length : 7.83 inches
ItemPackageDimensions_Width : 7.01 inches
ItemPackageQuantity : 2
ItemTypeKeyword : pillow-block-bearings
Manufacturer : uxcell
Material : Alloy Steel
NumberOfItems : 2
PartNumber : f23120500ux0055
ProductDescription : Material: Chrome steel sealed bearing and cast iron housing, providing durability and resistance to corrosion.
Bearing Type: Self-aligning pillow block bearing, capable of compensating for misalignment between the shaft and the housing.
Bearing Insert: The pillow block bearing uses a standard ball bearing insert, which allows for high radial loads and moderate axial loads.
Lubrication: The bearing is pre-lubricated with grease and ready for immediate installation. The appropriate lubricating oil can be added through a grease nipple after using for some time.
Usage: Commonly used in machinery and equipment, particularly in the agricultural and industrial sectors. It is designed to support rotating shafts and provide stability and smooth operation.
Tips: Tighten the set screw with a wrench before installation, and perform a second tightening after a period of operation. Normally, this type of product requires 2-3 times of screw tightening.

ProductSiteLaunchDate : 2024-01-06T08:11:29.093Z
Size : UCF209-28
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 31171500