Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects
BulletPoint2 : Color: Silver Tone; Outer Dia.: 14mm/0.55inch; Inner Dia: 12mm x 8mm/0.31inch x0.31inch; Length: 35mm/ 1.38/ 2.05inch; Fastening Screws: M5*0.8
BulletPoint3 : The universal joint is made of 45# steel and with electroplated finish, sturdy and durable. Features with large transmission torque, high efficiency, stable transmission, small gap impact
BulletPoint4 : When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place
BulletPoint5 : In order to give full play to its function, please start the installation within the maximum allowable eccentricity range
Color : Silver
DriveSystem : External Hex
ExteriorFinish : Silver
ExternallyAssignedProductIdentifier1 : 0886102652695
ExternallyAssignedProductIdentifier2 : 886102652695
FinishType : Polished
GradeRating : Industrial
ItemName : MECCANIXITY 6mm to 8mm Inner Dia Rotatable Universal Joint Shaft Coupling Motor Shaft Coupler L35 x D14 with Screws and Wrench for RC Model
ItemPackageDimensions_Height : 12.6 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pin-and-block-universal-joints
Manufacturer : MECCANIXITY
Material : Steel
MetalType : Alloy Steel
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : mea210520ee0212
ProductDescription : What is this?
Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects.

What will I get?
Color: Silver Tone
Material: 45# Steel
Surface Finish: Electroplated
Section: One
Size: 35mm x 14mm/1.38inch x 0.55inch (L*D)
6mm to 8mm(0.24inch to 0.31inch)
Package Contents: 1 x Universal Joints, 1 x Wrench, M4*0.7 Fastening Screws

Is there any advantages of the product?
Made of 45# steel and with electroplated finish, the universal joint is sturdy and durable.
Features with large transmission torque, high efficiency, stable transmission, small gap impact. Especially under the correct technical control conditions, it can access long lasting use.

How to use it ?
When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place.

What should I notice?
In order to give full play to its function, please start the installation within the maximum allowable eccentricity range.
ProductSiteLaunchDate : 2021-10-29T04:23:57.180Z
Size : 6mm to 8mm
Style : 8mm to 10mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27110000