Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Head Dia.: 2mm / 0.08", Total Length: 150mm / 5.9", Head Length: 45mm / 1.77", Shank Size: 105x10mm / 4.13"x0.39"(LxD)
BulletPoint2 : Material - The align punch is made of chromium-vanadium steel, which has been heating treated to have high strength and high hardness and is resistant to knock, and has a surface spray treatment for a good anti-rust effect.
BulletPoint3 : Usage - Simply place the punch over the mark on your workpiece and strike with a hammer, can be used for marking drill holes, scribing lines, aligning parts and more.
BulletPoint4 : Applications - Alignment punches can be used for cylindrical punching, center punching, percussion punches, pin punches, bench punches, round chisels, positioning punches, etc, and are very suitable for use in machinery maintenance, molding manufacturing, bench industries, factory workshops, etc.
BulletPoint5 : Notice - Please confirm the head diameter, shank diameter and length of the punch. When using, align the punch so that the striking direction is perpendicular to the end face of the punch. Please understand that the head diameter error is ±0.015mm
BulletPoint6 : Body size (φ): 0.4 inches (10 mm)
Color : Gold Tone
ExternallyAssignedProductIdentifier : 7610733254422
ExternallyAssignedProductIdentifier1 : 4018754084951
ExternallyAssignedProductIdentifier2 : 04018754084951
GpsrSafetyAttestation : 1
IncludedComponents : Punch Set
IncludedComponents1 : 3/16" Line-Up Punch
IncludedComponents2 : 3/16" Line-Up Punch
IncludedComponents3 : 3/16" Line-Up Punch
IncludedComponents4 : 3/16" Line-Up Punch
IncludedComponents5 : 3/16" Line-Up Punch
ItemName : HARFINGTON Line Pin Punch 1/16"x6"(2x150mm) CR-V Cylindrical Alignment Punch for Machinery Maintenance
ItemPackageDimensions_Height : 0.47 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-pin-punches
Manufacturer : HARFINGTON
Material : Chrome Vanadium Steel
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : 102-5/6 PC
ModelNumber : 98812202
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : hta240110hh001283
PowerSourceType : hand-powered
ProductDescription : The align punch is made of chromium-vanadium steel, which has been heating treated to have high strength and high hardness and is resistant to knock, and has a surface spray treatment for a good anti-rust effect.
The cylindrical punches are used to align holes for the insertion of rivets, pins, or bolts, not for driving pins, rivets, or bolts.
Simply place the punch over the mark on your workpiece and strike with a hammer, can be used for marking drill holes, scribing lines, aligning parts and more.
Alignment punches can be used for cylindrical punching, center punching, percussion punches, pin punches, bench punches, round chisels, positioning punches, etc, and are very suitable for use in machinery maintenance, molding manufacturing, bench industries, factory workshops, etc.


ProductSiteLaunchDate : 2024-02-26T06:47:41.408Z
SheetCount : 150
Size : 2x150mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 44101602