Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Head Dia.: 5mm / 0.2", Total Length: 150mm / 5.9", Head Length: 45m / 1.77", Shank Size: 105x10mm / 4.13"x0.39"(LxD)
BulletPoint2 : Material - The align punch is made of Cr-Mn steel, which has been heating treated to have high strength and hardness up to 48-58 HRC and is resistant to knock, and has a metallic paint surface for a good anti-rust effect.
BulletPoint3 : Usage - Simply place the punch over the mark on your workpiece and strike with a hammer, can be used for marking drill holes, scribing lines, aligning parts and more.
BulletPoint4 : Applications - Alignment punches can be used for cylindrical punching, center punching, percussion punches, pin punches, bench punches, round chisels, positioning punches, etc, and are very suitable for use in machinery maintenance, molding manufacturing, bench industries, factory workshops, etc.
BulletPoint5 : Notice - Please confirm the head diameter, shank diameter and length of the punch. When using, align the punch so that the striking direction is perpendicular to the end face of the punch.
Color : Gold Tone
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 815518023973
ExternallyAssignedProductIdentifier2 : 0815518023973
ItemName : HARFINGTON Line Pin Punch 7/32"x6"(5x150mm) Cr-Mn Steel Cylindrical Alignment Punch for Machinery Maintenance
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 6.3 inches
ItemPackageDimensions_Width : 2.36 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hand-tool-pin-punches
Manufacturer : HARFINGTON
Material : Alloy Steel
ModelNumber : 2397
OperationMode : Manual
PartNumber : hta240109hh000722
ProductDescription : The align punch is made of Cr-Mn steel, which has been heating treated to have high strength and hardness up to 48-58 HRC, and is resistant to knock, and has a metallic paint surface for a good anti-rust effect.
The cylindrical punches are used to align holes for the insertion of rivets, pins, or bolts, not for driving pins, rivets, or bolts.
Simply place the punch over the mark on your workpiece and strike with a hammer, can be used for marking drill holes, scribing lines, aligning parts and more.
Alignment punches can be used for cylindrical punching, center punching, percussion punches, pin punches, bench punches, round chisels, positioning punches, etc, and are very suitable for use in machinery maintenance, molding manufacturing, bench industries, factory workshops, etc.


ProductSiteLaunchDate : 2024-02-22T08:47:41.221Z
Size : 5x150mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1